INSTRUCTION MANUAL

NOTICE ?

• Do not stand on or use any part of this product as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer's instructions as this could void the product warranty.

TOOLS REQUIRED

• DRUM KEY (PROVIDED)

Assembly Information:

• 1 PERSON ASSEMBLY
• SUITABLE FOR AGES 3 YEARS OLD AND UP
• APPROXIMATELY 45 MIN. ASSEMBLY TIME

HARDWARE

• 1 75MM TENSION ROD (12 PCS)
• 2 40MM TENSION ROD (8 PCS)
• 3 WASHER (20 PCS)
• 4 CLAW HOOK (12 PCS)

PARTS

• A BASS SHELL (1 PC)
• B SMALL TOM DRUM (1 PC)
• C LARGE TOM SHELL (1 PC)
• D BASS RIM (2 PCS)
• E TOM RIM (2 PCS)
• F BASS SKIN (2 PCS)
• G TOM SKIN (2 PCS)
• H CYMBAL (1 SET)
• I SEAT (1 PC)
• J SEAT LEGS (1 SET)
• K PEDAL (1 SET)
• L ARM (2 PCS)
• M BASS LEG (2 PCS)
• N DRUMSTICKS (1 SET)

PRODUCT ASSEMBLY

Step 1

Place two part F bass skins and two part D bass rims on the part A bass shell. Attach the bass rims/skins with twelve part 1 tension rods, twelve part 3 washers, and twelve part 4 claw hooks.

Diagram Description: The bass drum shell (A) is shown with two bass skins (F) and two bass rims (D) being attached. Tension rods (1), washers (3), and claw hooks (4) are depicted connecting the rims to the shell.

Step 2

Place two part G tom skins and two part E tom rims on the part C large tom shell. Attach the tom rims/skins with eight part 2 tension rods and eight part 3 washers.

Diagram Description: The large tom drum shell (C) is shown with two tom skins (G) and two tom rims (E) being attached. Tension rods (2) and washers (3) are depicted connecting the rims to the shell.

Step 3

Insert two part M bass legs into the bass drum. Tighten the wingnuts to secure the legs.

Diagram Description: The bass drum is shown with two bass legs (M) being inserted into the bottom of the shell and secured with wingnuts.

Step 4

Stand the bass drum up on its legs. Insert two part L arms into the top of the bass drum. Tighten the wingnuts to secure the arms. NOTE: Make sure the arms face opposite directions.

Diagram Description: The bass drum is shown standing upright. Two arms (L) are being inserted into the top of the bass drum and secured with wingnuts. The note emphasizes that the arms should face away from each other.

Step 5

Insert the small tom and large tom into the arms. Tighten the wingnuts to secure the drums.

Diagram Description: The assembled bass drum with arms is shown with the small tom drum (B) and large tom drum (C) attached to the arms (L) and secured with wingnuts.

Step 6

Insert the stand from the part H cymbal set into the designated slot. Tighten the wingnut to secure the stand. Remove the wingnut, washer, and top pad from the stand, place the cymbal, then replace the top pad, washer, and wingnut.

Diagram Description: The cymbal stand (part of H) is shown being inserted into a slot on the drum set and secured. A close-up view illustrates how to attach the cymbal (H) to the stand using a wingnut, washer, and top pad.

Step 7

Assemble the part K pedal.

Diagram Description: The pedal (K) is shown with its components, indicating assembly.

Step 8

Place the part I seat on the part J seat legs. Tighten the wingnuts to secure the seat.

Diagram Description: The seat (I) is shown being placed onto the seat legs (J) and secured with wingnuts.

HELP CENTER

Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com

• [Chat Icon]
• [Product Assembly Icon]
• [Returns & Refunds Icon]

PRODUCT WARRANTY INFORMATION

• All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
• All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
• All returns must be shipped back to the Best Choice Products Return Center at the customer's expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer's responsibility to either use the original shipping boxes or purchase new boxes.
• Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer's responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.

WARNING

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.