INSTRUCTION MANUAL

3-Seat Converting Outdoor Swing

Ver. 3 SKY2134 + SKY2135 + SKY2468 + SKY5936 + SKY5937

At BCP, we strive to offer a perfect balance between quality and value. Our diverse catalog of everyday essentials is tailored to our customers, ensuring high quality at a low price.

Important Safety Information:

• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws, and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer's instructions, as this could void the product warranty.

TOOLS REQUIRED

• WRENCH (PROVIDED)
• 2 PERSON ASSEMBLY
• UP TO 60 MIN. ASSEMBLY

HARDWARE

Allen Wrench: [Allen Wrench Symbol]

Wrench: [Wrench Symbol]

Weight Capacity: 750 LBS

Assembly Personnel: 2 People

Hardware List:

• 1: M8 x 100mm BOLT SET (2 PCS)
• 2: M8 x 95mm BOLT SET (4 PCS)
• 3: M8 x 75mm BOLT SET (2 PCS)
• 4: M6 x 60mm BOLT SET (6 PCS)
• 5: M6 x 40mm BOLT SET (4 PCS)
• 6: M6 x 35mm BOLT SET (4 PCS)
• 7: M6 x 32mm SCREW (6 PCS)
• 8: M6 x 30mm BOLT SET (2 PCS)
• 9: NUT CAP (24 PCS)
• 10: SPRING HOOK (2 PCS)
• 11: SPACER (2 PCS)
• 12: KNOB (2 PCS)

PARTS

Frame Components:

• A: TOP BAR (1 PC)
• B: FRONT LEG (2 PCS)
• C: BACK LEG (2 PCS)
• D: LEG SUPPORT (2 PCS)
• E: BACK SUPPORT (1 PC)
• F: MIDDLE SUPPORT (1 PC)
• G: FRONT SWING FRAME (1 PC)
• H: BACK SWING FRAME (1 PC)
• I: LEFT SEAT FRAME (1 PC)
• J: RIGHT SEAT FRAME (1 PC)
• K: SWING ARM (4 PCS)
• L: SEAT (1 PC)
• M: LOWER CANOPY FRAME (2 PCS)
• N: UPPER CANOPY FRAME (2 PCS)
• O: CANOPY (1 PC)
• P: CUSHION (3 PCS)

PRODUCT ASSEMBLY

Step 1: Assemble Main Frame

Insert a part B front leg into the part A top bar. Attach a part C back leg with a part 1 bolt set and two part 2 bolt sets. Repeat on the other side. Place a part 9 nut cap on every nut.

Step 2: Attach Supports

Attach a part D leg support and one side of the part E back support to the legs with three part 4 bolt sets. Repeat on the other side. Note: The leg support and back support share a part 4 bolt set. Attach the part F middle support with two part 8 bolt sets, one on each side. Place a part 9 nut cap on every nut.

Step 3: Assemble Seat Frame and Swing Arms

Attach the part I left seat frame to the part G front swing frame and part H back swing frame with two part 6 bolt sets. Repeat on the other side to attach the part J right seat frame. Attach four part K swing arms with four part 5 bolt sets. Secure the top of the swing arms with two part 10 spring hooks.

Step 4: Install Seat

Insert the part L seat into the clamps on the back swing frame. Attach the seat with two part 3 bolt sets and two part 11 spacers. Place a part 9 nut cap on every nut.

Step 5: Hang Swing

Hang the swing by inserting the spring hooks into the designated holes on the top bar.

Step 6: Attach Canopy

Slide a part M lower canopy frame into the slots on the part O canopy. Within the canopy, attach a part N upper canopy frame with three part 7 screws. Repeat on the other side. Secure the canopy to the swing with two part 12 knobs, one on each side.

Step 7: Place Cushions

Place three part P cushions.

CONVERTING THE SWING

Pull the seat up from the clamps on the back swing frame. Lay the seat flat while sliding the support arm into the designated slots on the rear of the swing.

For more products, visit: bestchoiceproducts.com

BCP Rewards

Earn points while you shop. Join today! bestchoiceproducts rewards: Join | Earn | Redeem

Give your friends 15% off their first order! For each successful referral, you'll receive 100 points.

HELP CENTER

Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com

PRODUCT WARRANTY INFORMATION

All items can be returned for any reason within 60 days of receipt for a full refund, provided the item is returned in its original product packaging with all accessories. Refunds will be issued to the original payment method. No re-stocking fees will be charged.

All returns require an RA (Return Authorization) number, obtained from Best Choice Products Customer Service. Items received without an RA may face processing delays. Refunds or replacements are processed within 5 business days of receipt.

Returns must be shipped back to the Best Choice Products Return Center at the customer's expense. If the return is due to an error by Best Choice Products, a pre-paid shipping label will be provided via email. Customers are responsible for return shipping boxes.

Pictures may be required for some returns to ensure items are not damaged prior to return. Items are considered undamaged only after receipt and verification by Best Choice Products. All damages are the customer's responsibility until acknowledged by Best Choice Products.

WARNING

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.