About Best Choice Products
As shoppers, Best Choice Products aims to provide a perfect balance between quality and value. Their diverse catalog of everyday essentials is tailored to customers, offering high quality at low prices.
Important Notices and Warnings
? NOTICE: Please retain these instructions for future reference.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws, and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- This product requires adult assembly; supervision is recommended when in use.
- This product contains small parts. May result in choking hazard for children under 3 years.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer's instructions as this could void the product warranty.
⚠️ WARNING: ADULT ASSEMBLY REQUIRED
⚠️ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years old.
? 3x 1.5V AG10 Batteries (15, Provided) ? 3+ Years Old and Up ? 1 Person Assembly ⏱️ Up to 45 Min. Assembly
Parts List
A Bass Drum Legs
4 PCS
B Suction Cup
1 PC
C Bass Pedal
1 PC
D Pedal Spring
1 PC
E Beater
1 PC
F Toms Mount
1 PC
G Mount Stand
2 PCS
H Cymbal Stand
1 SET
I Cymbal Cap
3 PCS
J Cymbal
3 PCS
K Stop Lock
4 PCS
L Snare Drum Mount
2 PCS
M Drumsticks
1 SET
N Bass Drum
1 PC
O Large Toms
1 SET
P Snare Drum
1 SET
Q Floor Tom
1 PC
R Stool Seat
1 PC
S Stool Neck
1 PC
T Stool Legs
1 PC
U Tripod Legs
3 PCS
V Tripod Neck
1 PC
W Tripod Mount
1 PC
X LED Light Fixtures
5 PCS
Before Assembly
Step 1: Remove the white pull tab from the five part X LED lights. Attach the two small fixtures to the bottom of the part P snare drums. Attach two medium fixtures to the two part O Large Toms and one to the part Q Floor Tom.
NOTE: To attach lights, place the fixture on the outer shell of the drum with the bulb facing inward. Press the middle section inward until the arms catch the inner walls of the drum.
Diagram shows LED light fixtures (X) being attached to snare drums (P), large toms (O), and floor tom (Q).
Drum Kit Assembly (Classic Configuration)
Step 1
Insert four part A drum legs into the bottom of the part N bass drum, push to secure.
Diagram shows Bass Drum (N) with four Bass Drum Legs (A) attached.
Step 2
Insert the part B suction cup into the designated slot on the back of the part N bass drum.
Diagram shows the back of the Bass Drum (N) with the Suction Cup (B) inserted.
Step 3
Affix the part D pedal spring into the upper and lower fasteners of the part C bass pedal. Attach the part E beater to the part C bass pedal.
Diagram shows the Bass Pedal (C) with the Pedal Spring (D) and Beater (E) attached.
Step 4
Insert the foot pedal assembly into the designated slot on the back of the part N bass drum.
Diagram shows the assembled Bass Pedal (C, D, E) attached to the Bass Drum (N).
Step 5
Locate the part F large toms mount and attach two part G mount stands. Insert the two mount stands into the holes on the top of the part N bass drum.
Diagram shows the Toms Mount (F) with two Mount Stands (G) attached to the top of the Bass Drum (N).
Step 6
Thread the part H cymbal stand through the part J cymbal and secure with the part I cymbal cap. Slide the part K stop lock onto the cymbal stand, then secure the cymbal assembly to the part F toms mount. Repeat to complete two more cymbal assemblies and set aside. Insert the bottom of the tallest cymbal stand into the hole on the top of the bass drum.
Diagram shows a front view of a cymbal assembly (H, I, J, K) attached to the Toms Mount (F). Another diagram shows the tallest cymbal stand inserted into the Bass Drum.
Step 7
Attach the part L snare drum mount to the designated slots on the sides of the bass drum. Attach the two part P snare drums to the part L mounts and fasten with the attached buckle. Insert the bottom of the medium cymbal stand into the hole on the side of one of the part P snare drums, then secure the part K stop lock to the drum's bottom rim.
Diagram shows Snare Drum Mounts (L) attached to the sides of the Bass Drum (N), with Snare Drums (P) mounted. A cymbal stand (H) is shown attached to a Snare Drum (P) with a Stop Lock (K).
Step 8
Place the two part O toms on the part F mount and fasten with the attached buckles.
Diagram shows the two Large Toms (O) attached to the Toms Mount (F).
Step 9
Insert three part U tripod legs into the part V tripod neck, then insert the top of the neck into the part W tripod mount. Place the part Q floor toms onto the assembled tripod. Insert the bottom of the short cymbal stand into the hole on the side of one of the part Q floor toms, then secure the part K stop lock to the drum's bottom rim.
Diagram shows the tripod assembly (U, V, W) with Floor Toms (Q) placed on it, and a cymbal stand (H) attached to a Floor Tom (Q).
Stool Assembly
Step 1
Insert the part S stool neck into the part R stool seat, then insert the bottom of the stool neck into the part T stool legs.
Diagram shows the Stool Seat (R), Stool Neck (S), and Stool Legs (T) being assembled.
Drum Kit Assembly (Upright Configuration)
Step 1
Insert the part S stool neck into the part W tripod mount, then insert the stool neck into the part T stool legs. Place the part N bass drum onto the tripod and secure.
Diagram shows the Bass Drum (N) mounted on the tripod assembly (W, S, T).
Step 2
Thread the part H cymbal stand through the part J cymbal and secure with the part I cymbal cap. Slide the part K stop lock onto the cymbal stand, then attach the cymbal assembly by affixing the stop lock to the edge of the bass drum.
Diagram shows the cymbal assembly (H, I, J, K) attached to the Bass Drum.
Step 3
Attach the part P snare drums to the designated slots on the side of the bass drum, then attach the part O toms drums to the snares.
Diagram shows Snare Drums (P) and Toms (O) attached to the sides of the Bass Drum.
Warnings Regarding Batteries
- Do not mix alkaline, standard (carbon zinc) and rechargeable (nickel hydride) batteries.
- Do not mix old and new batteries.
- Non-rechargeable batteries should not be charged.
- Rechargeable batteries should be charged under adult supervision only.
- Exhausted batteries should be removed.
- The supply terminals should not be short-circuited.
- Do not put batteries next to or in a heat source (fire, electronic heating device, etc.).
- Do not hit batteries against hard objects.
- Do not submerge batteries in water.
- Batteries should be inserted with the correct polarity.
Care & Maintenance
- Wipe down the playing surface with a clean, damp cloth.
- Wipe down the drumsticks with a clean, damp cloth.
- Buff the cymbals with a soft, non-abrasive cloth.
- Cover this drum kit when not in use.
- Do not leave unattended in direct sunlight.
Help Center & Warranty Information
Have questions about your product? Visit the Help Center at: help.bestchoiceproducts.com
? Chat Support | ? Product Inquiry | ❓ Orders FAQ | ? Product Assembly | ? Returns & Refunds
Product Warranty Information
Items can be returned for any reason within 60 days of receipt for a full refund, provided they are in original packaging with all accessories. Refunds are issued to the original payment method. No re-stocking fee is charged.
A Return Authorization (RA) number, obtained from a Best Choice Products Customer Service Representative, is required for all returns. Items received without an RA may not be accepted or may experience processing delays. Refunds or replacements are processed within 5 business days of receipt.
Return shipping costs are the customer's responsibility unless the return is due to a Best Choice Products error, in which case a pre-paid shipping label will be provided. Customers are responsible for providing suitable packaging for returns.
Pictures may be required to verify item condition for returns. Items are not considered undamaged until received and verified by Best Choice Products. Any damages are the customer's responsibility until acknowledged by Best Choice Products.
⚠️ WARNING: Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
