Maxcom mRing MR100 Smart Ring User Guide

Getting Started

Initial Setup

Charging the Device

Before the first use, charge the smart ring with the included cable. Charging is indicated by a red LED. When fully charged, the green LED will light up.

App Installation and Setup

Download and install the control application on your phone:

• Scan the QR code provided [QR Code for App Download].
• Search the Google Play Store or Apple App Store for the "AIZO RING" app.

Phone Configuration

Ensure the following are enabled on your phone:

• Bluetooth and GPS location (for Android phones).
• Bluetooth (for iOS phones).

App Permissions

During installation, grant the application permissions to work in the background and to access required phone resources (location, notifications, etc.).

Connecting the Smart Ring

Connect the device by clicking on the top right corner of the screen and selecting "add". Search for "mRing MR100" in the list of available devices. Note: The smart ring must be connected to charging when first connecting to the phone. During pairing, the ring will flash green for 5 seconds.

Personalizing Your Profile

Set your age, weight, and height in the app. Daily activity goals can be set in the app at activity management.

Wearing and Usage

Wearing Methods

When wearing the smart ring, place the sensors inside your finger for more accurate measurements. It is recommended to wear the ring on the index, middle, or ring finger for the best data monitoring.

Troubleshooting Connection Issues

To solve common smart ring connection problems:

• Turn on Bluetooth (phone must be visible to other devices).
• Turn on GPS/location (Android phones).
• Install the app and grant it permissions during the installation process (to work in the background, etc.).
• Connect the smart ring to charge before the first connection.
• Connect to the smart ring FROM THE APP LEVEL.

If Unsuccessful

• Check if the phone has GPS enabled.
• In phone settings, navigate to Applications > Notifications > Application permissions, and allow background operation and notifications.
• Check if the smart ring is already connected via the phone's Bluetooth menu. If yes, go to the BT menu, select "forget device," then connect via the app.

Technical Information and Compliance

Radio Frequency Information

Maximum EIRP: 0.79 dBm

Environmental Protection Information

This device is marked in accordance with European Directive 2012/19/EU and the Polish Act on waste electrical and electronic equipment with the symbol of a crossed-out waste container. This marking informs that this equipment, after its period of use, cannot be disposed of with other household waste.

Note: This equipment must not be disposed of as municipal waste!!! The product should be disposed of through selective collection at points prepared for this purpose. Proper handling of waste electrical and electronic equipment helps to avoid consequences harmful to human health and the natural environment resulting from the presence of hazardous components and improper storage and processing of such equipment. To enable recycling of materials used in the production of phone packaging, follow the material sorting rules established locally for this type of waste. The set includes a Li-ion battery. Used batteries are harmful to the environment. They should be stored in a specially designated point, in an appropriate container, in accordance with applicable regulations. Batteries and accumulators must not be disposed of as municipal waste; they should be taken to a collection point.

DO NOT THROW BATTERIES OR ACCUMULARS INTO FIRE!

Warranty and Declarations

Warranty Terms

Maxcom S.A., with headquarters in Tychy, ul. Towarowa 23a, 43-100 Tychy (NIP: PL6462537364) (hereinafter: Maxcom), grants a warranty for the purchased device (hereinafter: Product) for a period of 24 months for its proper operation. The product is covered by a warranty, an integral part of which is the proof of purchase. Damage resulting from improper use, electrostatic discharge, or mechanical damage will not be covered free of charge under the Warranty. If the user attempts self-repair or modification, the warranty will be void! If the device does not work properly, have it repaired at the nearest authorized service center or file a complaint with the seller. The manufacturer is not responsible for defects caused by the user as a result of improper use or non-compliance with the operating instructions.

Device Care: Careless handling of the device may damage it. Regardless of the IP protection class, the device must be protected against crushing, impact, and dropping. Use only a soft, clean, and dry cloth to clean the surface of the device. Do not paint the device, as paint may prevent proper operation. The device may heat up after prolonged use. In most situations, this is a normal symptom and most often occurs during charging or long-term operation. To avoid overheating, automatically slow down, close applications, stop charging, or even turn off your device.

Manufacturer's Note

The manufacturer is not responsible for any consequences caused by incorrect use, abuse, or failure to follow the instructions. This manual is intended for informational purposes only. Some of the features and options described may vary by software and country. The manufacturer reserves the right to change or introduce changes without notice.

Simplified EU Declaration of Conformity

Maxcom S.A. hereby declares that the type of radio equipment: mRing MR100 is in compliance with: Directive 2014/53/EU RED of April 16, 2014 (Radio Equipment Directive) and Directive 2011/65/EU of June 8, 2011 (Restriction of the use of certain hazardous substances in electrical and electronic equipment RoHS).

The full text of the EU declaration of conformity is available at the following Internet address: http://www.maxcom.pl/deklaracje