Maxcom Smart Watch User Manual

Maintenance

When using the smartwatch, remember the following maintenance tips:

• Regularly clean the bottom of the watch.
• When setting up the watch, ensure good contact between the sensor and the skin, and adequate airflow.
• Avoid using aggressive cosmetics on your wrist while wearing the watch.
• Discontinue use of the product if an allergic reaction occurs to the metal or strap material.

Watch Appearance

The smartwatch features a round display. The back of the watch includes a heart rate sensor and charging contacts.

The device is a black smartwatch with a round face, black strap, displaying the time, heart rate (102 bpm), and steps (1200). It has a digital display with hour markers.

Charging the Battery

Connect the included cable to the charging port on the back of the watch. Connect the other end of the cable to a computer or a 5V/2.1A max. phone charger USB port.

Diagram shows the charging cable connecting to the watch's rear port and a USB power source.

Control App and Pairing

App Download and Installation

1. Download and install the 'Da Fit' APP.

• Scan the QR code with your mobile phone to download the APP.

• For iOS system, select the App Store and search for 'Da Fit'.

• For Android system, select Google Play to download and install 'Da Fit'. Alternatively, scan the QR code to download.

Note: Your mobile phone must support Android 5.1 or iOS 8.0 or above, and Bluetooth 4.0 or above.

[QR Code for App Download]

Pairing Steps

1. Download the Da Fit app from the Play Store or App Store, or scan the QR code.
2. During installation, grant the app the requested permissions to maximize the device's capabilities.
3. Allow the app to run in the background.
4. Turn on your phone's GPS function (only for pairing).
5. Your phone must use Android 5.1 or newer, iOS 8.0 or newer, and have Bluetooth version 4.0 or newer.
6. Tap the watch icon (center bottom of the screen), then tap 'Add device' at the top.
7. Select your watch from the list.

Watch Features

1. Press and hold the watch face for a moment – it will shrink, and you can change the watch face display by scrolling left/right. A larger selection is available in the app: Watch Face > Watch Face Display.

Examples of Watch Faces and Screens:

Various watch faces are displayed, showing different information like time, date, weather (e.g., -02°, 20°F), steps (e.g., 12000, 20000), heart rate (e.g., 120 bpm), and battery status. Other screens shown include 'BREATHE' with a 'START' button, 'PLAYER' controls, and 'SHUTTER' function.

Removing the Device

Android System: Simply tap the 'Remove' button.

Apple iOS System: After disconnecting, tap the icon on the right in Bluetooth settings and select the device to remove as shown below.

Screenshots show the iOS Bluetooth settings menu, highlighting options to 'Remove Device' or 'Forget This Device'.

Specifications

* Maximum radio frequency emission power at 2402-2480MHz frequency.

Warranty

Warranty Coverage

• The Manufacturer guarantees that the Maxcom brand product is free from material and manufacturing defects and warrants it for 24 months from the date of purchase. In case of a defect or malfunction, contact the seller or official distributor. The product purchase receipt must be attached to the claim.
• The warranty provider will repair or replace products that do not meet the warranty parameters free of charge within a reasonable time.
• This warranty is valid only for the original owner of the product and is non-transferable.
• The warranty is valid within the territory of the Republic of Poland.
• The warranty does not exclude, limit, or suspend the buyer's rights arising from warranty regulations for defective products sold.
• Technical and warranty support is available on the www.maxcom.pl website.

The warranty does not cover:

• Normal wear and tear, including the battery, unless the damage is caused by material or manufacturing defects.
• Mechanical, thermal, chemical damage and resulting malfunctions.
• Defects caused by incorrect use of the device, deviating from its intended purpose and the user manual; self-modifications; use or storage deviating from the product's technical specifications; improper maintenance; use of batteries other than those supplied, or batteries unsuitable for use with the product; repair work performed by non-authorized service centers.

The above applies to the warranty validity for consumer goods according to Directive 1999/44/EC.

Short Declaration of Conformity

This device complies with the requirements of Directive 2014/53/EU of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity, and Directive 2011/65/EU (RoHS).

Frequently Asked Questions (FAQs)

1. Most common problems when connecting SMART devices:

1. Turn on BT function (the phone must be discoverable by other devices).
2. Turn on GPS function/location services.
3. Install the app and grant permissions during installation (for background running, multimedia access, etc.).
4. Connect to the watch via the app.

If it fails:

1. Check if GPS is turned on.
2. In phone settings > Apps & notifications > App permissions > enable background running and notifications.

2. Why does the watch disconnect when the smartphone (Android) screen turns off?

1. Background running is restricted.
2. Enable background running.

3. Why doesn't the watch show notifications?

1. Check in the app if the notification function is activated.
2. Allow the app to display notifications in the app settings. The watch displays notifications from your phone's notification bar – if the function is not activated on your phone, you must activate it in your phone's settings.

4. Why can't I shower with the watch in hot water?

Because steam can enter the device and cause corrosion.

Environmental Information

Note: This device is marked with a [WEEE Disposal Symbol] (crossed-out wheeled bin), in accordance with Directive 2012/19/EU on electrical and electronic waste and Polish Law. This symbol means that the device should not be disposed of with other household waste at the end of its useful life.

Note: DO NOT DISPOSE OF WITH HOUSEHOLD WASTE!

The product must be delivered to a designated collection point within the selective waste collection system for disposal. Proper handling of used electrical and electronic equipment contributes to avoiding factors harmful to human health and the natural environment, caused by hazardous substances used in the product, as well as improper storage and processing of such equipment.

The device contains a Li-ion battery. Used batteries are harmful to the environment. Batteries must be stored in designated locations in appropriate containers, in accordance with local regulations.

Batteries must not be disposed of with household waste; they must be handed over to designated collection points.

DO NOT THROW BATTERIES INTO FIRE.

[CE Mark] [RoHS Compliant]