Smart Watch User Manual

Maintenance

Please keep the following advice in mind when using this smartwatch:

• Regularly clean the underside of the watch.
• Adjust for a good contact with the skin and proper air circulation.
• Avoid using aggressive cosmetic products on your wrists while wearing the watch.
• If you experience an allergic reaction to the metal or bracelet material, discontinue use.

Watch Appearance

Description of the watch's design and features.

Battery Charging

Connect the dedicated end of the provided cable to the charging port on the back of the watch. Connect the other end of the cable to your computer's USB port or a 5V/2.1A maximum phone charger.

Control and Pairing Application

To use all features, download and install the "Da Fit" application.

Download and Install APP:

• Scan the QR code with your mobile phone to download the APP. [QR Code]
• For iOS systems, search for "Da Fit" in the App Store.
• For Android systems, search for "Da Fit" in Google Play to download and install. You can also scan the QR code to download.

Note: Your mobile phone must support Android 5.1 or iOS 8.0 or above, and Bluetooth 4.0 or above.

Installation Steps:

1. Download the Da Fit application from the Play Store or App Store, or scan the QR code.
2. During installation, accept the relevant permissions requested by the application to fully utilize the equipment's potential.
3. Allow the application to run in the background.
4. Activate your phone's GPS [GPS Icon] (only during the pairing process).
5. Your phone must be running Android 5.1 or later, iOS 8.0 or later, and be equipped with Bluetooth 4.0 or later.
6. Click the watch icon (at the bottom center of the screen), then tap "Add device" at the top.
7. Select your watch from the list.

Introduction to Watch Functions

Watch Faces:

Press and hold the watch face for a moment; it will shrink. Swipe left/right to change the watch face. A wider selection of watch faces is available in the application: Watch Icon > Watch Look.

Delete Device

For Android system: Simply click "Remove" or "Delete".

For Apple iOS: After disconnecting, click the symbol to the right in Bluetooth settings and select "Forget This Device" to ignore the device, as shown below.

Specifications

*Maximum radio frequency power emitted in the 2402-2480MHz band.

Warranty

Warranty Scope:

The manufacturer warrants that the Maxcom product is free from material and manufacturing defects for normal use within 24 months from the date of purchase. If a defect is found or a malfunction occurs, contact your authorized reseller or distributor. Proof of purchase must accompany the claim.

The warrantor will repair or replace products that do not meet specified parameters free of charge within a reasonable time.

• This warranty applies only to the original purchaser and is non-transferable. It covers the territory of the Republic of Poland.
• The warranty does not exclude, limit, or suspend the buyer's rights resulting from warranty provisions for sold items.
• Technical and warranty assistance is available on the website www.maxcom.pl.

The warranty does not cover:

• Normal wear and tear, including batteries (accumulators), unless damage is caused by material or manufacturing defects.
• Mechanical, thermal, chemical defects, or any resulting damage.
• Defects resulting from improper use not in accordance with the intended purpose and manual; unauthorized modifications; use or storage not in accordance with product technical specifications; incorrect maintenance; use of components other than those supplied or use of any component not intended for use with the product; technical work performed by unauthorized personnel.

The above refers to warranty validity rules for consumer goods resulting from Directive 1999/44/CE.

Declaration of Conformity:

This equipment complies with Directive 2014/53/UE of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and mutual recognition of their conformity, and Directive 2011/65/UE (RoHS).

Frequently Asked Questions (FAQs)

1. Common issues with SMART device connection:

   1. Activate Bluetooth function [Bluetooth Icon] (the phone must be visible to other devices).
   2. Enable GPS [GPS Icon]/location.
   3. Install the application and accept permissions (for background operation, multimedia access, etc.) during installation.
   4. Connect to the watch FROM the application.

   If connection fails:

   1. Check if GPS [GPS Icon] is enabled.
   2. In phone settings > Apps & notifications > App permissions > Background activity and notification permissions.
   3. Check if your watch/bracelet is already connected to your phone via Bluetooth [Bluetooth Icon] menu. If yes, go to BT menu > forget device > then connect from the application.

2. Why does the watch disconnect when the smartphone screen turns off (with Android)?

   1. The application's background operation function is blocked.
   2. Allow background operation.

3. Why does the watch not display notifications?

   1. Check in the application if the notification function has been activated.
   2. Allow the application to display notifications in its settings. The watch displays notifications from your phone's notification bar. If this function is not active, you must enable it in your phone's settings.

4. Why should you avoid taking a hot bath with the watch?

   Because water vapor can penetrate the device and cause corrosion.

Important Notes

REMARK: Consult your doctor before starting a new sport. Measurements taken from the watch MUST NOT be used for medical diagnosis.

ENVIRONMENTAL PROTECTION INFORMATION:

This device is marked in accordance with European Directive 2012/19/UE and Polish law on waste electrical and electronic equipment with the symbol of a crossed-out wheeled bin [WEEE Bin]. This marking indicates that the equipment must not be disposed of with other household waste after its use.

Note: This equipment must not be disposed of with municipal waste!

The product should be collected selectively at designated collection points. Proper disposal of waste electrical and electronic equipment helps prevent negative consequences for human health and the environment resulting from hazardous components and incorrect storage and use of these items.

The device contains a rechargeable Li-ion battery. Used batteries are harmful to the environment. They must be stored in a specially designated place, in accordance with current regulations.

Piles and batteries must not be disposed of in municipal waste and must be returned to a collection point.

DO NOT DISPOSE OF PILES OR BATTERIES IN FIRE.

Compliance Marks:

• CE Marking [CE Mark]
• RoHS Compliance [RoHS Mark]