SJÄLLAND
IKEA
Design and Quality IKEA of Sweden
General Assembly Information
Tools Required: ? Screwdriver (not included)
Important Notes:
- ❌ Do not stack parts incorrectly.
- ✔️ Assemble with assistance when needed.
- ❌ Avoid forcing parts or damaging components.
- ✔️ Assemble on a soft surface like a rug to protect the floor.
- ❓ If unsure, consult the instructions.
- Follow the IKEA assembly guide carefully.
Document Number: AA-2045051-3
Step 1: Attaching Panels
Parts: 8x Screw (Part 116630), 4x Panel Component
Action: Insert 4 screws (116630) into the designated holes on one panel component. Ensure correct alignment; ❌ incorrect alignment can damage the material.
Action: Repeat for the second panel component, using 4 screws (116630) for each.
Diagram Description: Two large slatted panels are shown. Arrows indicate the direction of assembly and insertion of screws (part 116630) into pre-drilled holes.
Step 3: Securing Components
Action: Secure the assembled components using 8 screws (Part 116630), 4 on each side. Ensure all connections are firm.
Diagram Description: Similar to Step 1, showing the attachment of screws (116630) to secure the main structure.
Step 4: Final Positioning
Action: With assistance, carefully flip the assembled unit. A large curved arrow indicates the rotation needed to place it in its upright position.
Diagram Description: Two individuals are shown working together to rotate the assembled furniture piece.
Assembly Complete.
