FALHOLMEN Outdoor Table Assembly Instructions
Brand: IKEA
Product Overview
This document provides assembly instructions for the IKEA FALHOLMEN outdoor table. It details the necessary tools, lists all components, and guides you through the assembly process step-by-step.
Tools Required
- Phillips screwdriver ?
- Flathead screwdriver ?
Important Notes Before Assembly
- Protect your floor by assembling the table on a soft surface, such as a rug. ?️
- If you encounter any issues or have questions during assembly, please contact IKEA for assistance. ?
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 117794 | Bolt | 4x |
| 113006 | Screw | 8x |
| 117853 | Dowel/Connector | 2x |
| 100092 | Allen Key | 1x |
Assembly Steps
Step 1: Attach Legs to Tabletop
Place the tabletop upside down on a soft surface. Attach the legs to the designated points on the tabletop. Use four 117794 bolts and eight 113006 screws to secure the legs.
Diagram Description: Shows the tabletop upside down on a rug. Two legs are being attached to one side of the tabletop using bolts and screws.
Step 2: Attach Crossbars
With the table frame upright, attach the crossbars between the legs. Use two 117794 bolts and the 100092 Allen key to fasten the crossbars securely.
Diagram Description: Shows the table frame flipped upright. A crossbar is being inserted between two legs and secured with bolts and an Allen key.
Step 3: Complete Assembly
Attach the remaining legs and crossbars by following the same procedure as in Step 2. Ensure all connections are tight and secure.
Diagram Description: Shows the final attachment of the remaining legs and crossbars, completing the table structure.
