SJÄLLAND Outdoor Armchair Assembly Instructions

Parts List and Tools

Ensure you have all the necessary parts and tools before beginning assembly. The following parts are included:

• 4x Part 191235
• 2x Part 191237
• 4x Part 191236
• 4x Part 191221
• 1x Allen Key (111631)
• 2x Part 191126
• 1x Part 192714

Required tool: Screwdriver (not included).

Assembly Steps

Step 1: Attach the side frame components. Use parts 191235, 191237, 191236, 191221, and the Allen key (111631). Ensure correct orientation as indicated by the diagrams. Avoid overtightening screws initially.

Step 2: Connect the seat and backrest frame. Use parts 191221 and the Allen key (111631) to secure the components. Pay attention to the alignment and ensure no parts are forced.

Step 3: Attach the armrests. Use parts 191235, 191236, and the Allen key (111631) to fix the armrests to the main frame. Ensure the armrests are level.

Step 4: Secure the backrest. Insert the backrest into the designated slots on the frame and ensure it clicks into place. The diagrams show how to align and attach the backrest securely.

Step 5: Attach the seat. Similar to the backrest, align the seat with the frame and ensure it is properly secured. The diagrams illustrate the correct method for attaching the seat.

Step 6: Final tightening. Once all parts are in place, go back and tighten all screws securely using the Allen key (111631). Do not overtighten.

Step 7: Attach protective caps. Use parts 192714 and 191126 to cover the screw heads or attachment points as shown in the diagrams.

Step 8: Final check. Ensure the armchair is stable and all parts are securely fastened. The diagrams show a final check of the assembled chair.

Important Information

Note: Periodically check and retighten all screws to maintain the stability and safety of the armchair.

Care Instructions: Clean with a damp cloth and mild soap. Wipe dry with a clean cloth.

Manufacturer: IKEA of Sweden