SJÄLLAND Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA SJÄLLAND outdoor furniture series. Please follow these steps carefully to ensure correct assembly.
The document begins with the product name "SJÄLLAND" and the IKEA logo. It depicts two slatted panels, which are components of the furniture.
General Assembly Guidance
Before starting, ensure you have the necessary tools and understand the assembly process. Refer to the following guidance:
-
Tool Recommendation: A screwdriver is required. [?]
A figure is shown with a screwdriver, but an 'X' symbol indicates it might not be the correct tool for all steps or should be used with caution.
-
Assembly Assistance: Two people may be needed for certain steps. [??]
Illustrations show figures assembling furniture, with one figure guiding the other.
-
Correct Handling: Ensure parts are handled and assembled correctly to avoid damage or incorrect construction. [✔️]
A diagram shows panels being assembled correctly, contrasting with an illustration of incorrect assembly (crossed-out panels).
-
Troubleshooting/Support: If you encounter difficulties, consult IKEA support. [?]
A figure appears confused with a question mark [❓] while holding assembly parts and a hammer [?]. Another figure is shown using a phone with the IKEA logo, suggesting customer service.
Assembly Steps
Follow the numbered steps below to assemble your SJÄLLAND furniture.
Step 1
Attach the first slatted panel to the frame.
Parts Required:
- 4x Screws (116630)
Procedure: Insert 4 screws (116630) into the designated holes to secure the panel. Ensure correct insertion; avoid incorrect methods as shown in the diagram.
A close-up shows screw (116630) being inserted into a hole. An accompanying diagram shows a hand with a screw crossed out [❌], indicating an incorrect way to handle or insert the screw. An arrow [➡️] indicates the direction of panel placement.
Step 2
Attach the second slatted panel to the frame.
Parts Required:
- 4x Screws (116630)
Procedure: Insert 4 screws (116630) into the designated holes to secure the second panel. Follow the same precautions as in Step 1.
Similar to Step 1, this shows the attachment of the second panel using screws (116630). An arrow [➡️] indicates the direction of panel placement.
Step 3
Continue securing the panels.
Parts Required:
- 8x Screws (116630)
Procedure: Secure the components using 8 screws (116630) as indicated in the diagram. Pay attention to the correct screw insertion methods.
This step shows the attachment of furniture components using screws (116630). The quantity indicated is 8x. An arrow [➡️] shows the direction of placement.
Step 4
Flip the assembled unit.
Procedure: With assistance, carefully flip the assembled furniture unit to its final orientation. This step requires careful handling.
Two figures are shown working together to carefully turn the assembled furniture unit over. This indicates the need for two people or careful maneuvering.
