BONDHOLMEN Outdoor Table Assembly Instructions

Parts Included

• 1x Cross Brace (Part 10037808)
• 4x Bolts (Part 113134)
• 4x Washers (Part 105089)
• 8x Screws (Part 113006)
• 4x Connectors/Dowels (Part 113107)
• 1x Allen Key (Part 100092)

Assembly Steps

Step 1

Attach the four legs to the central cross brace. Ensure the legs are inserted into the designated slots on the brace. [Diagram shows legs connecting to the base cross structure].

Step 2

Insert two side support pieces into the upper part of the legs on one side. Use the provided connectors/dowels (Part 113107) to secure them. [Diagram shows side supports being attached to legs with connectors, indicated by arrows and '2x'].

Step 3

Repeat Step 2 for the other side, attaching the remaining two side support pieces to the legs using the connectors/dowels.

Step 4

Position the tabletop frame onto the assembled leg structure. Align the holes on the frame with the tops of the legs. [Diagram shows tabletop frame being placed on top of the leg assembly].

Step 5

Secure the tabletop frame to the legs using four bolts (Part 113134) with washers (Part 105089) and the Allen key (Part 100092). [Diagram shows bolt, washer, and Allen key being used to fasten the frame to the legs]. Do not overtighten yet.

Step 6

Use the remaining eight screws (Part 113006) to further secure the tabletop frame to the leg assembly. [Diagram shows screws being inserted into pre-drilled holes].

Step 7

Carefully flip the assembled table upright onto its legs. [Diagram shows a curved arrow indicating the table is being turned over].

Important Information

Tools required: Screwdriver [Screwdriver icon]. A hammer is shown crossed out [Hammer - not recommended icon], suggesting it's not needed or advised for assembly. Protect your floor with a soft material like a rug during assembly [Person protecting floor icon]. If you encounter any issues or have questions, contact IKEA [Person on phone with IKEA sign icon].

Product identifier: AA-2169085-3. © Inter IKEA Systems B.V. 2019.