Denver Smart Home App Instructions for Lighting Products
Universal Edition
Preparation for Use
To begin using the Denver Smart Home lighting product, follow these steps:
- Turn on the lamp and ensure your smartphone is connected to a 2.4 GHz Wi-Fi network.
- Download and open the "Denver Smart Home" app. You can find it by searching in the App Store or by scanning the QR code provided on the product packaging or in this document.
- If this is your first time using the app, tap the "Register" button. If you already have an account, tap the "Login" button.
Note: QR codes for app download are typically found on the product packaging or within the app store.
Device Network Configuration
Follow these steps to connect your device to the network:
- Open the Denver Smart Home app and navigate to the "Devices" page.
- Tap the "+" icon, usually located in the upper right corner of the page.
- Select "Lighting devices" from the list of available device types.
- Choose your connection mode: EZ mode or AP mode.
- EZ Mode:
- Ensure the light flashes quickly, approximately twice per second. This indicates the device is in configuration mode.
- If the light is not flashing, press and hold the reset button until the indicator light turns off. Release the button, and the device should enter configuration mode, flashing rapidly.
- On the "Add Device" page in the app, tap the button confirming that the light is blinking rapidly to start the connection process.
Technical Specifications
| Specification | Value |
|---|---|
| Model identifier | Denver LSC-531 |
| Input voltage | 220-240VAC |
| Input AC frequency | 50Hz/60Hz |
| Output voltage | 12VDC |
| Output current | 2A |
| Output power | 24W |
| Average active efficiency | 82% |
| Efficiency at low load (10%) | 70% |
| No-load power consumption | <0.5W |
Environmental Information and Declaration of Conformity
This product contains materials, components, and substances that may be hazardous to health and the environment if not handled correctly. The symbol of a crossed-out trash can ♺ indicates that this electrical and electronic equipment should not be disposed of with household waste but must be disposed of separately. Municipalities have collection points where such equipment can be submitted free of charge at recycling stations or other collection sites, or collected from households. For more information, contact your local technical department.
Inter Sales A/S hereby declares that the radio equipment type LSC-531 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.denver-electronics.com. Navigate to the website, click the search icon, enter model number LSC-531, go to the product page, and find the RED directive under downloads/other downloads.
Operating Frequency Range: 50Hz/60Hz
Max Output Power: 24W
Denver A/S
