Denver LSC-531 Smart LED Strip: User Manual and App Instructions
Introduction
This document provides instructions for using the Denver Smart Home App with the Denver LSC-531 lighting product. It covers preparation, device network configuration, and important safety and environmental information.
Preparation for Use
- Power on the lamp and ensure your smartphone is connected to a 2.4 GHz Wi-Fi network.
- Download and open the "Denver Smart Home" app from your app store or by scanning the QR code provided on the packaging.
- If this is your first time using the app, tap the "Register" button. If you already have an account, tap "Login".
Device Network Configuration
To connect your device:
- Open the Denver Smart Home app and navigate to the "Devices" page.
- Tap the "+" symbol in the upper right corner of the page.
- Select "Lighting devices" from the device list.
- Two configuration modes are available: EZ mode and AP mode.
EZ Mode
Ensure the light indicator blinks rapidly (twice per second). This signifies the light strip is in configuration mode. If it is not blinking, press and hold the reset button until the indicator turns off. Release the button, and the light strip will enter configuration mode. On the "Add Device" page, tap the "Confirm light blinks rapidly" button to initiate the connection.
Technical Specifications
| Model Identifier | Denver LSC-531 |
|---|---|
| Input Voltage | 220-240VAC |
| Input AC Frequency | 50Hz/60Hz |
| Output Voltage | 12VDC |
| Output Current | 2A |
| Output Power | 24W |
| Average Active Efficiency | 82% |
| Efficiency at Low Load (10%) | 70% |
| No-load Power Consumption | < 0.5W |
Environmental Information and Compliance
Electrical and electronic equipment contains materials, components, and substances that can be hazardous to health and the environment if not handled correctly. This equipment is marked with a crossed-out trash can symbol ?️, indicating it should not be disposed of with household waste but should be collected separately.
Cities have collection points for free disposal at recycling stations or other collection sites, or collection from households. For more information, contact your local technical department.
Inter Sales A/S declares that the radio equipment type LSC-531 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.denver-electronics.com. Search for the model number LSC-531 to find the declaration under downloads/other downloads.
Operating Frequency Range: 50Hz/60Hz
Max Output Power: 24W
Manufacturer Information:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Find us on Facebook: facebook.com/denverelectronics
