Denver Smart Home Lighting Quick Start Guide

Introduction

This is a quick start guide to get your Denver Smart Home lighting product up and running. For the full manual, please visit the Denver Electronics website and search for your specific product.

App Usage Visual Guide

The following steps illustrate the process of connecting your device using the Denver Smart Home app:

• Step 1: Initial Setup - On the app's main screen, tap "Add Device".
• Step 2: Select Device Type - Choose "Lighting devices (bluetooth-enabled)" from the list of available device types.
• Step 3: Confirmation - Power on your light. Ensure it blinks rapidly to indicate it's in pairing mode. Tap "Confirm light blinks rapidly" in the app to proceed.

Note: The app screenshots show the progression from the "No Device" screen to selecting the device type and confirming the light's blinking status.

Preparation for Use

1. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network.
2. Download and open the "Denver Smart Home" app. You can find it by searching in the App Store or by scanning the provided QR codes:
   • [QR code for Android App]
   • [QR code for iOS App]
3. If this is your first time using the app, tap the "Register" button. If you already have an account, tap "Login".

Device Network Configuration

1. Open the Denver Smart Home app and navigate to the "Devices" page.
2. Tap the "+" icon, typically located in the upper right corner of the page.
3. Select "Lighting devices" from the displayed list.
4. Choose your connection mode: EZ mode or AP mode.
   • EZ Mode:
     • Verify the light is flashing quickly (twice per second), indicating it's in configuration mode.
     • If not, press the lamp switch 3 times (on-off-on-off-on) until the light flashes rapidly.
     • Tap the "Confirm light blinks rapidly" button on the "Add Device" page to initiate the connection.
   • AP Mode: (Details not provided in the OCR, but typically involves connecting to a device hotspot)

Important Information

Product Changes and Errors

Please note that all products are subject to change without prior notice. Denver Electronics A/S reserves the right to make corrections for errors and omissions in this manual.

Copyright © DENVER ELECTRONICS A/S. All rights reserved.

Environmental and Disposal Information

Electric and electronic equipment, including batteries, may contain materials hazardous to health and the environment if not handled correctly. The crossed-out trash can symbol [WEEE disposal symbol] indicates that this equipment and its batteries should not be disposed of with regular household waste but must be disposed of separately.

As an end user, it is your responsibility to submit used batteries to the appropriate designated facility for recycling, ensuring they do not harm the environment.

Cities typically have collection points where electric and electronic equipment and batteries can be submitted free of charge at recycling stations or collected from households. More information is available from your local technical department.

EU Declaration of Conformity

Inter Sales A/S hereby declares that the radio equipment type SHL-340 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.denver-electronics.com. Navigate to the website, click the search icon, enter model number "SHL-340", and find the declaration under downloads.

Technical Specifications

• Operating Frequency Range: 50~60Hz
• Max Output Power: 9W

Manufacturer Information

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
[Facebook icon] facebook.com/denverelectronics
Made in China