Denver SHO-110 Smart Home Camera Setup Guide

Preparation

• Prepare your Wi-Fi network and password.
• Ensure your mobile device uses iOS8 or higher, or Android 4.1 or higher.
• Ensure you are using a 2.4 GHz Wi-Fi network. 5 GHz networks are not compatible.
• Download and install the DENVER SMART HOME application from the App Store or Google Play.

App Download:

Search for "DENVER SMART HOME" in the App Store or Google Play. The app is available for both iOS and Android devices.

Visual Description of App Store/Google Play: The screen shows the DENVER SMART HOME app in both the Apple App Store and Google Play Store. It displays screenshots of the app's interface, showing how to add a device and manage settings. Buttons to "Download on the App Store" and "ONDEK HET OP Google Play" are visible.

Account Registration

Register an account in the DENVER SMART HOME application.

1. Step 1: Enter your mobile number or email address.
2. Step 2: Enter the verification code and create a password.

Visual Description of Registration Screens: The first screen prompts for a mobile number or email address. The second screen prompts for a verification code sent to the phone and allows password creation.

Power Connection

How to reset my device:

• Loosen the cover on the bottom of the camera (secured with 2 screws).
• Under the cover, there is a reset button. Press and hold this button until you hear the voice prompt "ready to connect".
• Insert the Micro SD card under the cover on the bottom.

Visual Description of Camera Ports: The image shows the bottom of the camera. One view shows the SD card slot labeled "SD Card". The other view shows the reset button labeled "Reset" located under the camera's bottom cover.

Adding the Camera to the App

Option 1: Using QR Code

1. Step 1: In the app, in the top right corner of the "Add Device" screen, tap "Others".
2. Step 2: Select "QR Code".
3. Step 3: Enter your Wi-Fi network name and password.
4. Step 4: Scan the QR code with the camera.

Visual Description of QR Code Pairing: The screens show the process of pairing via QR code. It includes steps for selecting "Others", choosing "QR Code", entering Wi-Fi credentials, and scanning the QR code with the camera. A QR code is displayed on one of the screens.

Option 2: Using Smart Configuration

Step 1: In the app, in the top right corner of the main screen, tap (+). Then, select "Smart Camera".

The smart camera is located in the "Security and sensor" category of the application.

Visual Description of Smart Configuration: The screen shows the main app interface with a "+" icon in the top right corner. Tapping this leads to options including "Smart Camera".

Frequently Asked Questions (FAQ)

1. Can I share the camera with family and friends?

   Yes, you can share your camera with family and friends so they can access the camera and control smart home devices like light bulbs and switches. In the app, tap the "Profile" button and then the "Home Management" button to grant or revoke sharing permissions. Other users must download the app and register a new account to share.

2. What is the wireless range?

   The wireless range of the camera is determined by the Wi-Fi router and the room conditions. Check your router's specifications for the exact range.

3. Does the camera appear disconnected or inaccessible?

   Check that the Wi-Fi router is connected and within range. Ensure you have the latest app version by tapping "Check for firmware updates" in the app settings.

4. The camera cannot connect to the Wi-Fi network.

   Ensure you enter the correct Wi-Fi password during Wi-Fi setup. Check for other internet connection issues. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

5. How many cameras can I connect?

   The DENVER SMART HOME application can connect an unlimited number of devices in an unlimited number of device locations. The number of devices that can be connected to a Wi-Fi router may be limited.

AC / DC ADAPTER SPECIFICATIONS

Important Information

Notice: All products are subject to technical changes without prior notice. Denver Electronics A/S reserves the right to correct errors and omissions in the manual.

Disposal of Electrical and Electronic Equipment:

This symbol ♺ (crossed-out wheelie bin) on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. Due to the presence of hazardous substances, electrical and electronic equipment can have a negative impact on the environment and human health. By ensuring this product is disposed of correctly, you will help to conserve natural resources and prevent potential negative consequences for the environment and human health. For more information about where you can drop off your waste equipment, please contact your local city office or your household waste disposal service.

Declaration of Conformity:

Inter Sales A/S hereby declares that the radio equipment type SHO-110 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.denver-electronics.com. Search for the ICON on the top line of the page. Enter the model number: SHO-110. Then go to the product page, and the red directive is found under download / other downloads.

Operating Frequency Range: 2412MHz~2472MHz

Maximum Output Power: 6W