LIAN LI UNI FAN TL WIRELESS 120-140 Installation Guide
Package Contents
The package includes the following items:
- 3 x UNI FAN TL Wireless fans
- 1 x L-Wireless Receiver
- 12 x Screws
- 1 x Connecting Cable
L-Wireless Receiver Installation
Switching Cable Orientation
To change the cable orientation on the L-Wireless Receiver:
- Lift the cover from one side.
- Switch the orientation as needed.
- Secure the cover.
Connecting the Power Module
The power module sockets on the L-Wireless Receiver are of different sizes. Please pay close attention to the direction when installing the power module to ensure proper connection.
Diagram Description: Visual showing the L-Wireless Receiver's power module sockets, highlighting the need for correct orientation.Fan Installation and Connection
Removing the Fan Interlocking Key
If the radiator outlet interferes with the fan interlocking key, you can remove the key.
Diagram Description: Illustration demonstrating the removal of the fan interlocking key.Fan to Fan Connection (Daisy-Chaining)
UNI FAN TL Wireless fans can be connected in a daisy-chain configuration.
Maximum devices per channel:
- 4 x UNI FAN TL Wireless
- 3 x UNI FAN TL Wireless LCD
- 4 x UNI FAN TL Wireless and LCD mix (up to 2 LCDs)
Cable Organization
Instructions and a diagram are provided for organizing and shortening cables.
Diagram Description: Illustration demonstrating cable management techniques, such as winding cables.Using Rubber Pads
Attach the provided rubber pads to the fan when securing it to a radiator. This helps enhance the overall aesthetics of the build.
Diagram Description: Visual showing rubber pads being applied to a fan mounted on a radiator.Fan Cable Connection
Connect the 4-pin PWM fan cable to a PWM fan header on the motherboard.
Important for Daisy-Chaining: If connecting 2 or more fans in a daisy chain, the second PWM fan header must be connected to the motherboard or a SATA adapter cable for stable power delivery.
Connect to the PSU SATA 15-pin connector for power.
Connect to the motherboard to read and control fan speed.
Diagram Description: Illustration showing fan cable connections to motherboard PWM header, PSU SATA, and motherboard for speed control. Also shows connection for daisy-chained fans. Diagram Description: Visual of a plastic cable clip with large and small sides for cable management.L-Wireless Controller Installation
The L-Wireless Controller can be installed using two methods:
Method 1
Connect to a PWM fan header.
Method 2
Connect to a motherboard USB 2.0 header.
Each L-Wireless Controller supports 10 channels of devices.
Diagram Description: Visuals illustrating Method 1 (PWM fan header connection) and Method 2 (USB 2.0 header connection) for the L-Wireless Controller.Safety and Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
Any modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Warning for Portable Device: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
2.4g wireless specification: Frequency 2402-2480MHz, Transmission: Below 10mw.
Manufacturer: LIAN LI INDUSTRIAL CO., LTD.
Note: Safety instructions and warnings are also provided in French, German, Dutch, Spanish, Italian, Polish, Portuguese, and Swedish in the original document. This section is summarized in English.
