LIAN LI UNI FAN TL LCD 120 RGB Installation Guide

Package Contents

The package includes the following items:

• LIAN LI UNI FAN TL LCD 120 RGB Fans (x3)
• Rubber Pads (x12)
• Cable Bundle (x1)

Fan to Fan Connection

This section describes how to connect multiple UNI FAN TL LCD fans together.

Step 1: Align and Connect

Fans feature interlocking mechanisms on their sides. Align the connection ports of one fan with the corresponding ports on another fan.

Step 2: Secure Connection

Gently push the fans together until they click into place, ensuring a secure connection. The diagram shows a fan being pushed into another, with labels indicating a secure connection.

Power Module Installation

❗ Important: The power module sockets are of different sizes. Please be aware of the direction when installing.

The diagram illustrates two types of sockets (large and small) on the power module. Ensure the orientation is correct during installation to match the power module's design.

❗ Important: Connect the power module cable to the side of the power module that has pins.

The diagram shows the power module cable being connected to the pin-side connector.

Steps to Switch Cable Orientation on Power Module

This section details how to change the orientation of the cable connected to the power module.

Step 1: Release Cable

Press the release tab on the cable connector to detach it from the power module. The diagram shows a finger pressing a tab labeled "[release]".

Step 2: Reorient Cable

Remove the cable from its current position.

Step 3: Secure Cable in New Orientation

Insert the cable into the desired orientation on the power module and push until it clicks securely. The diagram shows the cable being inserted into a different slot and labeled "[secure]".

Remove the Fan Interlocking Key

This step is optional and may be necessary if the radiator outlet interferes with the fan's interlocking key.

If the radiator outlet affects the fan interlocking key, you can remove them. The diagrams show how to detach the interlocking key from the fan frame.

Usage of the Rubber Pads

These rubber pads are used to enhance the overall aesthetics when securing the fan to the radiator.

Secure the fan to the radiator and cover the connection points with the rubber pads to improve the fan's appearance.

Use of Magnetic Adhesive Pad

This section describes how to use the magnetic adhesive pad.

Step 1: Remove Adhesive

Peel off the protective backing from the adhesive side of the pad.

Step 2: Apply Pad

Apply the magnetic pad to the desired location.

Controller Cable Connection

Connect the UNI FAN TL Series Controller to the motherboard and power supply.

Controller Capacity:

• Each port on the controller supports up to 3 TL LCD fans.
• The controller has a maximum capacity of 7 or 9 TL LCD fans per controller, depending on motherboard USB device limitations.
• The controller supports a maximum of 16 TL + TL LCD fans in total.

For more details, please visit the LIAN LI webpage.

Connection Points:

• Connect to the PWM fan header on the motherboard.
• Connect to the 5V ARGB 3-pin header on the motherboard.
• Connect to a PSU PCIe power connector.
• Connect to a USB header on the motherboard.

❗ Important: Please connect directly to the motherboard. Do NOT use a splitter.

The diagram illustrates these connection points and emphasizes direct connection to the motherboard.