LIAN LI UNI FAN TL WIRELESS LCD 120-140

Removing the Fan Interlocking Key

If the radiator outlet interferes with the fan interlocking key, you can remove them. This involves carefully removing the interlocking key from the fan frame.

Package Contents

• 3 x UNI FAN TL Wireless Fans
• 1 x L-Wireless Receiver
• 12 x UNI FAN TL Wireless LCD Fans
• 1 x L-Wireless Receiver

Fan to Fan Connection

Fans can be connected in a chain. Each group (channel) can daisy-chain a maximum of:

• 4 x UNI FAN TL Wireless
• 3 x UNI FAN TL Wireless LCD
• 4 x UNI FAN TL Wireless and LCD mix (up to 2 LCDs)

To connect, use the interlocking mechanism on the fan frame. Use the 'Secure' [✔️] and 'Release' [❌] points indicated.

L-Wireless Receiver Installation

Install the L-Wireless Receiver. Pay attention to the direction when installing the power module sockets, as they differ in size. The cover can be lifted from one side.

Usage of Rubber Pads

Secure the fan to the radiator and cover with the rubber pads to enhance the overall aesthetics.

USB Connector Clip

It is recommended to secure the clip at the USB connector to help the top cover stay in place.

Fan Cable Connection

Connect the fan cables to the appropriate headers:

• PWM Fan Header: Connect to a 4-pin PWM fan header on the motherboard for speed control.
• Motherboard USB 2.0 Header: Connect to the motherboard's USB 2.0 header to read and control fan speed.
• PSU SATA 15-pin Connector: Connect to the PSU's SATA 15-pin connector for stable power delivery.

Important: If connecting 2 or more fans in a daisy chain, the second PWM fan header must be connected to the motherboard or a SATA adapter cable for stable power delivery.

L-Wireless Controller Installation

Install the L-Wireless Controller. Two methods are provided for installation. Each L-Wireless Controller supports up to 10 devices.

Cable Clip Detail

Note that the plastic cable clip has a large and small side for proper fitment.

Safety and Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. Changes not expressly approved may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation, or consulting a dealer/technician.

RF Warning: The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.

Please scan the QR code for important safety instructions and warnings. Read carefully before use to ensure proper handling and safety.

Technical Specifications

Wireless: 2.4g frequency 2402-2480MHz, Transmission Power: Below 10mw.

Manufacturer: LIAN LI INDUSTRIAL CO., LTD.

Model Number: G50.12TLLCD1W3B(W).01