IKEA EXCEPTIONELL Pull-Out Interior Fittings Assembly Instructions
Parts List
- 2x Screws (109510)
- 2x Screws (139150)
- 18x Screws (150769)
- 4x Screws (148510)
- 6x Springs (150769)
- 2x Caps (128891)
- 4x Brackets (126888)
- 4x Brackets (126888)
- 2x Brackets (128537)
- 2x Brackets (128536)
- 2x Rails (147650)
- 1x Rail Assembly (10050926)
- 1x Rail Assembly (10050905)
- 1x Rail Assembly (10051031)
- 1x Rail Assembly (10050976)
- 2x Support Pieces (147230)
- 2x Support Pieces (147231)
- 4x Cover Plates (128535)
- 2x Drawer Sides (10073107)
- 2x Drawer Sides (10073107)
Assembly Steps
Step 1: Prepare Components
Attach the specified screws and components to the wooden panels as shown in the diagrams. Use a hammer and screwdriver as indicated.
Diagram Description: Shows a person using a hammer and screwdriver on a wooden panel with pre-drilled holes. Various screws and dowels are shown.
Step 2: Attach Drawer Slides
Attach the drawer slide components to the wooden panels using the provided screws. Ensure correct orientation as per the diagrams.
Diagram Description: Shows attaching metal slide components to wooden panels with screws, using a screwdriver. Arrows indicate the direction of attachment.
Step 3: Assemble Drawer Box
Connect the drawer sides and base using the provided screws and slide mechanisms. Ensure a secure fit.
Diagram Description: Illustrates connecting drawer sides to a base panel, with close-ups showing the insertion of screws and the engagement of slide mechanisms.
Step 4: Install Drawer Slides on Cabinet
Mount the corresponding drawer slide components onto the cabinet frame. Pay attention to the left (L) and right (R) markings.
Diagram Description: Shows the installation of drawer slides onto the interior of a cabinet frame. Arrows indicate the correct placement and orientation.
Step 5: Insert Drawer Box into Cabinet
Carefully slide the assembled drawer box onto the installed cabinet slides. Listen for a 'click' to confirm proper engagement.
Diagram Description: Depicts sliding the drawer box into the cabinet, with close-ups showing the engagement of the drawer slides with a 'click' sound indicated.
Step 6: Attach Front Panel
Attach the front panel to the drawer box. Ensure it is aligned correctly before securing.
Diagram Description: Shows attaching a front panel to the drawer. Arrows indicate the direction of insertion and securing.
Step 7: Adjustments
Make any necessary adjustments to ensure the drawer operates smoothly. The diagrams show how to adjust the alignment and spacing (minimum 3.5 mm).
Diagram Description: Close-up views showing adjustment mechanisms on the drawer slides, with arrows indicating the direction of adjustment and a measurement of 3.5 mm.
Step 8: Final Assembly
Complete the assembly by attaching any remaining components as shown in the final diagrams.
Diagram Description: Shows the fully assembled pull-out interior fitting within the cabinet, with final components being attached.
Important Information
For detailed instructions and part identification, refer to the diagrams provided in the original manual. Ensure all parts are accounted for before beginning assembly.
Product Reference: AA-2200639-5
