IKEA KNIVSHULT Drawer Slide Assembly Instructions
This guide provides detailed instructions for assembling and installing the IKEA KNIVSHULT drawer slide system into furniture cabinets.
Product Overview
The KNIVSHULT system comprises robust drawer slides designed for smooth and reliable operation of drawers. Proper installation ensures optimal performance and longevity.
Parts List
Before beginning, please verify that you have all the necessary components:
- Cabinet Member (Left/Right): 10050926 (1x), 10050905 (1x)
- Drawer Member (Left/Right): 10051688 (1x), 10051628 (1x)
- Connector Pin: 10050910 (2x)
- Connecting Rod: 10050915 (1x)
- Drawer Front Screws: 107091 (4x)
Preparation
Prepare the drawer slide components according to the following steps:
-
Cut Connecting Rod (10050915)
Measure and cut the connecting rod (10050915) to the appropriate length based on the width of your drawer:
- For 40 cm and 80 cm wide drawers: Cut the rod to 125 mm.
- For 60 cm wide drawers: Cut the rod to 325 mm.
-
Insert Connector Pins (10050910)
Insert two connector pins (10050910) into the designated holes on each of the drawer members. Ensure they are fully seated and secure.
Installation
Follow these steps to install the KNIVSHULT drawer slides:
-
Attach Cabinet Members
Identify the left (L) and right (R) cabinet members. Attach these members to the inner sides of the cabinet. The diagrams illustrate the correct orientation and method for securing them, often involving tilting and rotating until a "Click!" is heard, indicating they are locked in place. Ensure the correct cabinet members (10051688/10051628 and 10050905/10050926) are used for the respective sides.
-
Attach Drawer Members to Drawer Box
Secure the drawer members to the sides of the drawer box. Use the connector pins (10050910) to attach them. Pay close attention to the clip mechanism, ensuring correct orientation [Clip mechanism: correct orientation ✔️, incorrect orientation ❌].
-
Attach Drawer Front
Attach the drawer front to the drawer box using the four provided drawer front screws (107091).
-
Insert Drawer into Cabinet
Align the drawer members on the assembled drawer box with the corresponding cabinet members already installed in the cabinet.
Carefully slide the drawer into the cabinet. It should glide smoothly on the runners.
Perform any necessary final adjustments to ensure the drawer is level, aligned correctly, and operates smoothly.
Care and Maintenance
Cleaning Instructions: Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
