KNIVSHULT
[IKEA Logo]
Before You Start
Gather the necessary tools: Pencil ✏️, Tape Measure ?, Saw ?.
Ensure correct orientation of parts. [Illustration: Correct part placement]
Avoid incorrect assembly. [Illustration: Incorrect part placement]
If unsure, consult IKEA resources. [Illustration: Person looking confused with parts and IKEA store]
Parts Included
| Part Number | Quantity |
|---|---|
| 10050926 | 1x |
| 10050905 | 1x |
| 10051688 | 1x |
| 10051628 | 1x |
| 10050910 | 2x |
| 10050915 | 1x |
Step 1: Prepare the Rod
Select the appropriate drawer width: 40 cm, 60 cm, or 80 cm. [Illustration: Drawer widths]
For a 40 cm or 80 cm drawer, measure and mark the rod (Part 10050915) at 125 mm from one end. [Illustration: Measuring rod]
For a 60 cm drawer, measure and mark the rod (Part 10050915) at 325 mm from one end. [Illustration: Measuring rod]
Cut the rod at the marked point using a saw. [Illustration: Sawing rod]
Dispose of the excess piece. [Illustration: Rod piece in trash can ?️]
Step 2: Assemble Rod and Connectors
Take two connectors (Part 10050910). [Illustration: Connector part]
Attach one connector to each end of the rod (Part 10050915). [Illustration: Attaching connector to rod with zoom-in detail]
Step 3: Attach Drawer Runners
Attach the drawer runners (Part 10050905) to the sides of the drawer. [Illustration: Drawer runners being attached to drawer]
Align the runner with the drawer edge and secure it. [Illustration: Detail of runner attachment to drawer]
Step 4: Attach Drawer Front Mechanism
Attach the U-shaped bracket (Part 10050905) to the drawer front mechanism. [Illustration: U-shaped bracket and attachment detail]
Ensure correct orientation. [Illustration: Incorrect bracket placement with cross ❌]
Secure the bracket by pushing it onto the rod end. [Illustration: Pushing bracket onto rod end, with rotation indicator]
Step 5: Install Cabinet Runners
Identify the left (L) and right (R) cabinet runners (Part 10051628). [Illustration: Cabinet with drawer runners installed, showing L and R labels]
Align the runner (Part 10051628) with the pre-drilled holes on the cabinet interior side. [Illustration: Attaching runner to cabinet side]
Push the runner into place until it clicks. [Illustration: Runner being attached, with 'Click!' indicator]
Repeat for the other side. [Illustration: Detailed view of runner attachment to cabinet interior]
Step 6: Insert Drawer and Adjust
Insert the assembled drawer into the cabinet runners. [Illustration: Drawer being inserted into cabinet]
The drawer should slide smoothly. [Illustration: Drawer fully inserted]
Insert cap (Part 107091) into the designated hole. [Illustration: Inserting cap and discarding it ?️]
Adjust the drawer position using the integrated adjustment features on the runners. [Illustration: Adjusting runner with a tool, showing rotation and arrow for movement]
Care and Maintenance
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
