Product Overview
This document provides comprehensive, step-by-step instructions for the assembly and installation of the IKEA KALERUM handle. It is designed to guide users through the process efficiently, detailing all necessary tools, measurements, and hardware.
Tools Required
The following tools are illustrated as necessary for the assembly process:
- Screwdriver (cross-head) ?
- Electric drill ⚡ (Note: Using a drill is recommended for efficiency)
- Pencil ✏️
- Clamp ?️
- Important: Ensure correct placement and alignment [❌]
Assembly Steps
Step 1: Measuring and Marking
Action: Accurately mark the desired positions for the handle on the cabinet door or drawer front. Use a pencil for clear and precise markings.
Key Measurements:
- 128 mm (5 1/16 inches)
- 256 mm (10 1/16 inches)
- 384 mm (15 1/8 inches)
Visual Description: The diagram shows a flat surface (e.g., a cabinet door) where a pencil is used to draw horizontal lines and vertical marks at specific intervals, indicating where the handle will be mounted. Two pencils are depicted, suggesting the marking process.
Step 2: Drilling Pilot Holes
Action: Drill pilot holes at the precise locations marked in Step 1. An electric drill is recommended for this task.
Drill Bit Specification: Ø 5 mm (3/16 inches)
Visual Description: An electric drill is shown in operation, creating holes in the marked surface. A clamp is used to securely hold the workpiece in place during drilling, ensuring stability and accuracy.
Step 3: Attaching the Handle
Action: Mount the KALERUM handle onto the surface by securing it with the appropriate screws.
Hardware Provided: Screws (Part number: 100414) ?
Visual Description: The KALERUM handle is positioned against the surface, and screws are being inserted through the handle and into the pre-drilled holes. The diagram also shows washers being used with the screws for a secure fit.
Product Information
Product Code: AA-2407662-4
Publication Date: 2025-04-22
© Inter IKEA Systems B.V. 2023
