KOMPLEMENT Drawer System Assembly Instructions

Introduction

This document provides detailed instructions for assembling and installing the IKEA KOMPLEMENT drawer system. The KOMPLEMENT series is designed to enhance storage solutions within IKEA furniture systems, offering practical and organized drawer functionality.

Required Tools and Parts

Before starting assembly, gather the necessary tools and identify all parts. Refer to the part numbers for correct identification.

Tools:

• Screwdriver (Phillips head) ?
• Hammer ?

Parts List:

Assembly Steps

Step 1: Assemble Drawer Frame Sides

Connect the side panels of the drawer frame. Insert two dowels (part 118331) into the designated holes on one panel. Align the second panel and secure it by screwing into the dowels.

[Visual: Two side panels being joined with dowels and screws.]

Step 2: Attach Front and Back Panels

Attach the front and back panels to the assembled side frame. Insert four dowels (part 101350) into the corresponding holes on the side panels. Align the front and back panels and press them firmly into place.

[Visual: Front and back panels being attached to the side frame using dowels.]

Step 3: Secure Corners with Cam Locks

Insert two cam locks (part 103430) into the pre-drilled holes on the inside of the drawer frame. Rotate the cam locks using a screwdriver to secure the panels together. Ensure a tight fit.

[Visual: Cam locks being inserted and rotated to secure the drawer corners.]

Step 4: Insert Drawer Base

Slide the drawer base panel into the grooves provided at the bottom of the drawer frame. Ensure it is fully seated.

[Visual: Drawer base panel sliding into the frame.]

Step 5: Attach Drawer Front

Align the drawer front panel with the front edge of the drawer frame. The panel should slide into place, connecting with the frame.

[Visual: Drawer front panel being attached to the drawer frame.]

Step 6: Secure Drawer Front

From the inside of the drawer, use four screws (part 110519) to attach the drawer front panel to the frame. A hammer may be used to gently tap the screws into place before fully tightening.

[Visual: Screws (110519) being used to secure the drawer front from the inside.]

Step 7: Attach Drawer Bottom Support

Secure the drawer bottom support piece. Use two screws (part 102349) to attach this support to the drawer structure, likely at the rear or sides for added stability.

[Visual: Drawer bottom support being attached with screws (102349).]

Step 8: Attach Drawer Slides to Drawer Box

Mount the drawer slide components (part 110661) to the sides of the assembled drawer box. Use four screws (part 109067) and two brackets (part 110678) for each slide. Ensure they are correctly oriented.

[Visual: Drawer slide components (110661) and brackets (110678) being attached to the drawer box with screws (109067).]

Step 9: Mount Drawer Slides to Cabinet

Attach the corresponding drawer slide components to the inside of the cabinet or wardrobe frame. Use four screws (part 109067) and two brackets (part 110661) for each slide. Align them with the pre-drilled holes in the cabinet side panels.

[Visual: Drawer slide components (110661) and brackets (110678) being attached to the cabinet interior with screws (109067).]

Step 10: Slide Drawer Frame onto Cabinet Slides

Carefully align the drawer box slides with the cabinet slides. Gently push the drawer frame onto the cabinet slides until it is fully engaged.

[Visual: Drawer frame being slid onto the cabinet-mounted drawer slides.]

Step 11: Insert Assembled Drawer

With the drawer frame now attached to the cabinet slides, insert the fully assembled drawer box into the frame. The drawer should slide smoothly into its position.

[Visual: Assembled drawer box being inserted into the drawer frame on the cabinet slides.]

Step 12: Secure Drawer Slides

Finally, secure the drawer slides to the cabinet structure. Use two screws/connectors (part 110670) for each side to ensure the drawer is firmly attached and operates correctly.

[Visual: Screws/connectors (110670) being used to secure the drawer slides to the cabinet.]