IKEA UTRUSTA Pull-Out System Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA UTRUSTA pull-out system, designed for kitchen cabinets. It details the components, steps, and safety information required for installation.
Parts List
| Part Description | Part Number | Quantity |
|---|---|---|
| Mounting Bracket/Clip | 10124259 | 24x |
| Screw (Type 1) | 100325 | 16x |
| Screw (Type 2) | 10126361 | 24x |
| Connector/Adapter | 10127257 | 4x |
| Pull-Out Mechanism Base | 10127301 | 4x |
Assembly Steps
Step 1: Prepare Cabinet Sides
Attach the mounting brackets (Part 10127301) to the inside of the cabinet side panels. Use 8x of the mounting brackets per side. Secure them using screws (Part 100325). Ensure the brackets are oriented correctly as shown in the diagrams.
[Diagram: Shows the interior of a kitchen cabinet. Two side panels are visible. On each side panel, four mounting brackets (Part 10127301) are being attached using screws (Part 100325). A total of 8 brackets are shown per side.]Step 2: Install Cabinet Rails
Attach the pull-out rails to the previously installed mounting brackets. The rails slide into the brackets. Ensure they are securely seated.
[Diagram: Shows the cabinet interior with rails being attached to the previously mounted brackets. Arrows indicate the rails sliding into the brackets.]Step 3: Assemble Pull-Out Baskets
Assemble the pull-out baskets. Connect the different sections of the baskets using the provided connectors (Part 10127257). Use 12x screws (Part 10124259) to secure the basket components.
[Diagram: Illustrates the assembly of the pull-out baskets. Multiple basket sections are shown being connected using small adapter pieces (Part 10127257) and secured with screws (Part 10124259).]Step 4: Attach Baskets to Rails
Carefully attach the assembled pull-out baskets onto the rails installed in the cabinet. Ensure they click or slide into place securely.
[Diagram: Shows the assembled pull-out baskets being carefully placed onto the rails inside the cabinet. Arrows indicate the direction of insertion.]Step 5: Secure Baskets
Fasten the pull-out baskets to the rails using the remaining screws (Part 10126361). Use 12x screws for this step.
[Diagram: Shows the pull-out baskets fully seated on the rails. Screws (Part 10126361) are being used to secure the baskets to the rails, with 12 screws indicated.]Step 6: Insert Pull-Out Mechanism
Insert the main pull-out mechanism components into the cabinet. This typically involves sliding or clicking them into place on the rails.
[Diagram: Depicts the main pull-out mechanism components being inserted into the cabinet, likely connecting to the rails or base.]Step 7: Finalize Installation
Complete the installation of the pull-out system. This may involve connecting different parts of the mechanism or ensuring all components are locked in place.
[Diagram: Shows the final stage of the pull-out mechanism installation, possibly involving locking or connecting the last parts.]Step 8: Cabinet Door Angle
The system is designed to work with cabinet doors opening to approximately 95 degrees (UTRUSTA 95°).
[Diagram: Illustrates a cabinet door opening outwards to an angle of approximately 95 degrees.]Usage and Safety
The UTRUSTA pull-out system is designed for kitchen cabinets. Ensure proper installation to avoid damage or malfunction. Each pull-out shelf has a maximum load capacity of 20 kg (44 lb).
[Diagram: Shows two kitchen cabinets, each fitted with the pull-out system. Labels on the shelves indicate a maximum weight capacity of 'Max 20 kg (44 lb)'.]
