Baby Trend SS66B Sit-N-Stand Elite Stroller

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or that has had its serial number altered or removed, invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. The Customer Service Department can be contacted Monday through Friday between 8:00 AM and 4:30 PM (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Warranty is valid only in North America.

Important Safety Warnings

⚠️ WARNING: Please follow all instructions to ensure your child's safety. Keep these instructions for future reference.

⚠️ WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out; always use the safety harness and ensure children are properly positioned.

⚠️ WARNING: Never leave children unattended.

• Purses, shopping bags, parcels, diaper bags, or accessory items may change the stroller's balance, causing a hazardous, unstable condition.
• Maximum weight capacity: Storage basket: 5 lbs (2.26 kg). Parent tray and child tray: 3 lbs (1.36 kg). Seat Belt storage pocket (for seat belt only): 1 lb (0.45 kg). Excessive weight may cause an unstable condition.
• Ensure the stroller is fully opened and locked in place before allowing a child near it.
• Maximum weight for the front seat: 50 lbs (22.68 kg).
• Maximum weight for the platform/jumpseat: 60 lbs (27.21 kg).
• The rear stand-on platform/jump seat is designed for a child at least 2 1/2 years old and not over 40 inches (101.6 cm) tall. Children totaling more than 110 lbs (49.89 kg) will cause excessive wear and stress on the stroller, potentially leading to a hazardous unstable condition.
• NEVER use the stroller on stairways or escalators.
• NEVER allow your stroller to be used as a toy.

Cleaning: Use only mild household soap or detergent and warm water on a sponge or clean cloth.

Maintenance: Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed. Discontinue use if the stroller malfunctions or becomes damaged.

Parts Identification

Verify you have all parts before assembly:

• Front Canopy
• Stroller Frame
• Child Tray
• Cup Holders (x4)
• Parent Tray
• Front Wheel*
• Rear Axle*

* Wheel styles may vary.

Assembly Instructions

IMPORTANT: Adult assembly is required. Follow instructions carefully and keep them for future reference.

Before assembly and each use: Inspect for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if parts are missing or broken.

Front Wheels

1. Unlock the release lever (See Figure 1a).

2. Unfold the stroller frame by sliding the thumb trigger left and squeezing the pull trigger while pulling backward on the handle (See Figure 1a & 1b).

3. To attach front wheels: Lean the stroller back so it rests on the handle with front and rear legs pointing upward. Position front wheels over front leg tubes, aligning the hole in the housing with the leg tube. Push down firmly until wheels lock securely. Tug each wheel to ensure it is securely attached (See Figure 1c).

Rear Wheels

4. Position the rear axle over the rear leg tubes with brake pedals facing backward. Push down equally on both sides until they lock into place (See Figure 2).

NOTE: NEVER use the stroller if the wheels do not lock into place. Contact customer service for assistance.

Foot Rest

5. Push downward on the foot rest until it snaps onto the U-shaped frame cross member (See Figure 3).

Child Tray

⚠️ WARNING: The child's tray is not a restraint device; always secure your child with the seat belt. DO NOT lift the stroller by the child's tray. Use care when attaching the child's tray with a child in the stroller.

6. To attach the child tray: Push the tray downward onto each side of the front armrests until both sides snap into place (See Figure 4). Verify the tray is securely latched.

7. To access the child seat: Pull one side of the release lever (located on the underside of the child tray) and lift upward. Either side of the tray will lift and rotate out of the way to allow access to the seat (See Figure 5a & 5b).

8. To rotate the child tray for infant car seat attachment: Press buttons on both sides of the tray to rotate it down 90 degrees (See Figure 6).

9. To remove the child tray: Pull both release levers located on the underside of each side of the tray and lift upward (See Figure 7).

Cup Holders

10. To attach cup holders: Push them downward onto each side of the armrests until they snap into place (See Figure 8). To remove, pull the release lever on the underside of the cup holder.

Canopy

11. To attach the canopy: Align male fittings on the canopy with slots on the armrest and push downward until snapped into place (See Figure 9). To open, push forward on the front edge while holding the rear. To fold, pull backward on the front edge. To remove, press the snap button under the armrest and pull to release.

Parent Tray

12. To attach the parent tray: Position the tray with storage compartment hinges facing forward. Snap the parent tray to the frame's stand (See Figure 10). Verify it is securely latched.

Operation and Use

Brakes

⚠️ WARNING: Always set brakes when the stroller is not being pushed to prevent it from rolling away. NEVER leave the stroller unattended on a hill or incline.

13. To engage brakes: Apply light downward pressure to the brake lever on each rear wheel. You may need to move the stroller slightly forward or backward to align brake teeth with the wheel brake cluster (See Figure 11a). Ensure the stroller does not move and both brakes are properly applied.

14. To release brakes: Gently lift up on the brake lever (See Figure 11b).

Securing the Child

⚠️ WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.

STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

Front Seat - 5-Point Harness

15. The 5-point harness has 3 attachment positions. Select the loop position that places the shoulder strap level with, or below, the child's shoulder. Feed the shoulder strap under the correct loop. To adjust harness slot, unhook the shoulder strap from the crotch buckle (See Figure 12a). Feed the shoulder strap through the harness spread slots (accessible from the rear of the seat) and reattach to the crotch buckle.

16. Carefully place the child in the stroller seat. Bring the safety harness around the child's waist and over the shoulders. Place the crotch strap between the child's legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child's waist and over the child's shoulders (See Figure 12b).

17. To release the harness clips: Apply pressure to both sides of each male clip until it releases (See Figure 13). This requires moderate effort to prevent accidental release by the child. Buckles may be hard to release when first used.

Car Seat Safety Belt

18. Strap the safety belt over the infant car seat through the seat belt slots on the car seat. Connect the buckles together (See Figure 14a). The safety belts are located in small pockets on the outer sides of the seat pads (See Figure 14b). Tighten the strap so the infant car seat fits snugly and cannot move. IT IS VERY IMPORTANT THAT THE INFANT CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED AROUND THE INFANT CAR SEAT. Store the stand feature safety belt when not in use.

Jump Seat - 3-Point Harness

19. Secure the child with the jump seat 3-point harness when the child is sitting on the jump seat (See Figure 15). To release, see Step 17.

Platform - Safety Belt

20. Secure the stand feature safety belt behind the child and engage the buckle (See Figure 16). This is the same safety belt used for the rear infant car seat.

Reclining Seats

⚠️ WARNING: The upright position should be used only for a child at least 6 months old.

21. The front seat has two recline positions. To recline: Rotate the recline bar and press backward on the seat back (See Figure 17). To place the seat in the upright position: Press upward on the seat back while rotating the recline bar.

Attaching Infant Car Seat

⚠️ WARNING: To avoid serious injury from falling, ALWAYS use the safety belt to secure both FRONT and REAR car seats.

22. To attach the infant car seat in the front seating position: Attach the child tray, rotate it to the vertical position, and recline the seat back. Position the infant car seat facing toward the rear of the stroller so the seat shell latches into the child tray (See Figure 18a).

23. To attach the infant car seat in the rear seating position: Attach the child tray, rotate it to the vertical position, and turn car seat support tabs on the stroller frame (See Figure 18b). Position the infant car seat facing toward the rear of the stroller so the seat shell latches into the child tray (See Figure 18a).

24. Verify the infant car seat is firmly locked onto the child tray. Then, STRAP THE SAFETY BELT OVER THE CAR SEAT through the seat belt slots and connect the buckles (See Figure 18c). Tighten the strap so the infant car seat fits snugly and cannot move. IT IS VERY IMPORTANT THAT THE INFANT CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED AROUND THE INFANT CAR SEAT.

25. To remove the Infant Car Seat: Squeeze the release handle at the foot-end of the seat and carefully lift upward (See Figure 19).

Sit on Jump Seat

26. Have the child sit on the jump seat facing backward. Secure the child with the jump seat 3-point harness. Part of the harness is stored in the back pocket of the front seat. Put the seat belt around the child's waist and buckle to the crotch strap (See Figure 20). Adjust the seat belt to be snug. To release, see Step 17.

Stand on Platform

27. Position the child on the platform at the back of the stroller, facing forward, holding the frame. Secure the stand feature safety belt behind the child and engage the buckle (See Figure 21). Ensure the child's feet are fully on the platform at all times.

Folding the Stroller

⚠️ WARNING: Care must be taken when folding and unfolding to prevent finger entrapment.

CAUTION: Do not allow children near the stroller while folding.

28. Close the canopy as described previously.

29. Pull the stroller backward slightly to rotate the front wheels forward (See Figure 22a).

30. To fold: Slide the fold lock with your thumb while squeezing the large fold button on the handle. Push forward on the handle (See Figure 22b).

31. Once folding begins, release the handle and push forward until the stroller is folded. Lock the release lever (See Figure 22c).

Maintenance and Care

Seat Pad

To clean the seat pad, use only mild household soap or detergent and warm water on a sponge or clean cloth.

Other

Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.