Manuals+

The Rene Drink Table

Assembly Instructions

Included Components & Hardware

Tools Needed: None specified

Level: Not specified

Notes: Assembly requires 2 people.

Diagram of Components:

The base is a cylindrical shape with a flat bottom and a slightly curved side. It has several circular indentations on the bottom for leveling glides. The tabletop is an oval shape with a slightly raised edge and a decorative brass-colored inlay on one side.

Assembly Steps

  1. Step 1

    Locate the nut underneath the base and remove it. This nut is used only for transit protection. Once the nut is removed, install the leveling glides, adjusting them as needed to ensure the base sits evenly on the floor.

    Diagram: An illustration shows the bottom of the cylindrical base with leveling glides being screwed into place.

  2. Step 2

    Looking at the top of the base, check to ensure the bumper quantity and placement match the illustration. The illustration shows four small circular bumpers positioned around the edge of the top surface of the base.

  3. Step 3

    Lay the paper template on top of the glass. With two people holding the tabletop above the base, carefully rotate it as needed to match the intended orientation illustrated at right. The illustration shows the tabletop positioned on the base, with the brass inlay facing outwards.

    Diagram: A diagram shows the dimensions of the tabletop and base: WIDTH: 14.5", DEPTH: 14.5", HEIGHT: 22", TABLETOP THICKNESS: [not specified], BASE DIAMETER: 9.5", BASE HEIGHT: 20.5".

  4. Step 4

    Once the tabletop is in the proper position, carefully lower it onto the base and remove the template. The tabletop should be securely positioned atop the base.

    Diagram: An illustration shows the tabletop being lowered onto the base.

Models: The Rene Drink Table, Rene Drink Table, Drink Table

PDF preview unavailable. Download the PDF instead.

Customer Instructions The-Rene-Drink-Table ?v=1750091949 Adobe PDF Library 17.0 Adobe InDesign 20.1 (Macintosh)

Related Documents

Preview The Rene Accent Tables by Maiden Home - Product Specifications
Detailed specifications and descriptions for The Rene Accent Tables collection by Maiden Home, including Drink Table, Side Table, and Coffee Table. Features cast glass tabletops and blackened steel bases.
Preview The Rene Side Table Assembly Instructions | Maiden Home
Step-by-step assembly instructions for The Rene Side Table by Maiden Home. Learn how to attach the base and tabletop securely.
Preview The Bank Oval Dining Table Assembly Instructions | Maiden Home
Step-by-step assembly instructions for The Bank Oval Dining Table by Maiden Home. Learn how to attach the legs and secure the tabletop for a stable and beautiful dining experience.
Preview The Reade Dining Table Assembly Instructions | Maiden Home
Step-by-step assembly instructions for The Reade Dining Table by Maiden Home. Learn how to attach the column legs, wing nuts, washers, and threaded rods to the tabletop.
Preview The Reade Round Dining Table Assembly Instructions
Assembly instructions for The Reade Round Dining Table by Maiden Home, including included components, hardware, and step-by-step guidance for assembly.
Preview Maiden Home Bank Console Table Assembly Instructions
Step-by-step assembly instructions for the Maiden Home Bank Console Table, including included components and hardware.
Preview Maiden Home Ria Coffee Table Assembly Instructions
Detailed assembly instructions for the Maiden Home Ria Coffee Table, including a list of components and step-by-step guidance for proper setup.
Preview The Bank Round Dining Table by Maiden Home - Specifications and Description
Discover The Bank Round Dining Table by Maiden Home. Featuring a beveled-edge tabletop and conical base, this handcrafted dining table is available in multiple sizes with oak or walnut finishes. View specifications and dimensions.