The Reade Dining Table

Included Components & Hardware

• Tabletop (1)
• Column Legs (6)
• Wing Nuts (6)
• Washers (6)
• Threaded Rods (6)

Assembly requires 1-2 people.

Assembly Steps

1. Lay the tabletop flat on a protected surface with the underside facing up.

2. Screw a threaded rod into one of the inserts on the tabletop, being careful not to overtighten.

3. Using the pre-drilled holes, slide one column leg over the threaded rod.

4. Secure the column leg to the tabletop by screwing a wing nut and washer onto the exposed portion of the threaded rod, being careful not to overtighten.

5. Repeat steps for all of the column legs.

6. With the help of another person, carefully flip the table over. Adjust the glides under the legs to ensure the table sits level on the floor.