The Bank Oval Dining Table

Included Components & Hardware

• Tabletop (1)
• Legs With Metal Bracket Attachment (2)
• Joint Screws (16)
• Allen Key (1)

Notes

Assembly requires 1-2 people.

Assembly Steps

1. Step 1

   Lay the tabletop flat on a protected surface with the underside facing up.

   [Image: Illustration of an oval tabletop placed upside down on a protected surface.]

2. Step 2

   Rest the legs with the attached metal brackets into the corresponding center insets.

   [Image: Illustration showing two legs with metal brackets being placed into the underside of the oval tabletop.]

3. Step 3

   Secure the legs by placing the screws into the pre-drilled holes of the metal brackets, then screwing them into place with the Allen key. Take care not to strip the screws.

   [Image: Close-up illustration of screws being inserted through the metal bracket into the tabletop using an Allen key.]

4. Step 4

   Take a moment to confirm that the hardware is secured tightly at all connection points.

   [Image: Illustration showing the legs securely attached to the tabletop with screws.]

5. Step 5

   With the help of another person, carefully flip the table over.

   [Image: Illustration of two people carefully flipping the assembled dining table upright.]