JURA X10c Technical Documentation

Installation Site Requirements

• Horizontal surface, impervious to water
• Environmental conditions:
  • Humidity: max. 80%
  • Ambient temperature: 10–35 °C
• Note: On-site connections must be made by a licensed professional before the JURA service technician can commission the appliance.
• Ensure that the on-site connections are as close as possible to the installation location of the appliance.
• Please refer to the operating instructions of your fully automatic coffee machine (chapter "Installing the appliance") for essential information.

Dimensions

Diagram showing the front, side, and top views of the JURA X10c with dimensions:

• Width: 373 mm
• Height: 470 mm
• Depth: 464 mm
• Height to drip tray: 201 mm
• Water connection height: 63-150 mm
• Rest water hose connection height: 58.4 mm
• Fixed water connection height: 119.6 mm

Overview: On-Site Requirements and Installation Notes

X10c: Fixed water connection according to DVGW W540

Diagram illustrating the fixed water connection:

• Mains connection
• Shut-off valve (on-site)
• Fine filter (on-site)
• Metal hose (1.5 m)
• Rest water hose
• Open, pressureless connection between the rest water hose and the wastewater pipe.
• Wastewater drain (siphoned, on-site)

Note: An installation guide for the fixed water connection can be found on the JURA website.

Rear View

Diagram showing the rear of the JURA X10c with connection points:

• G3/8" (plastic) connection
• Position 1: Rest water hose connection
• Position 3: Fixed water connection

Worktop Hole Position for Coffee Ground Ejection

Diagram showing the placement and dimensions for the coffee ground ejection hole in the worktop:

• Position 2: Pipe piece for coffee ground ejection
• Hole diameter: minimum 70 mm