Bestway Inflatable Kayak Owner's Manual
Models: 65077, 65115, 65131, 65132, 65142
Important Safety Instructions
WARNING: Follow all Safety and Operating Instructions. Failure to do so may cause overturn, explosion, or drowning.
- Inspect all components before each use: air-chambers, grab ropes, oars, air valves. Repair any damage.
- Do not exceed specified passenger numbers and load weights.
- Inflate according to numbered air chambers and rated pressure to avoid overinflation and explosion.
- Keep the boat balanced.
- Be aware of offshore winds and currents.
- Do not leave the boat exposed to sun for long periods.
- Never transport the boat inflated on a car.
- Be aware of potential damage from liquids (battery acid, oil, petrol).
Technical Safety Instructions
- Follow instructions to avoid drowning, paralysis, or serious injury.
- Do not exceed maximum recommended persons. Total weight of people and equipment must not exceed maximum load.
- Always use provided seats/seating spaces.
- When loading, do not exceed maximum recommended load. Distribute weight evenly. Avoid heavy items in the front.
- Maximum load includes people, provisions, personal effects, equipment, cargo, and consumables.
- Always inspect and use life-saving devices (life jackets, buoys).
- Keep buckets, water scoops, and air pumps available.
- All passengers must remain seated when the boat is in motion.
- Use in protected shore zones, up to 300 m (984 ft.). Be aware of natural factors (wind, tides, waves).
- Be careful when landing on shore. Sharp objects can puncture the boat.
- If one chamber is punctured, inflate the other fully to prevent sinking.
- Do not drag the boat on rough surfaces.
- Owner/operator responsibility: ensure at least one bucket/bailer is on board and secured.
- Be responsible and do not neglect safety rules.
- Know how to operate a boat. Seek local information/training.
- Drawings are for illustration only and may not reflect the actual product. Not to scale.
Technical Specifications
| Item | Recommended Working Pressure | Maximum Load Capacity | Maximum Number Of Persons |
|---|---|---|---|
| 65077 | 0.04 bar (0.6 psi) | 180kg (397lbs) | 2 adults |
| 65115 | 0.03 bar (0.5 psi) | 100kg (220lbs) | 1 adult |
| 65131 | 0.03 bar (0.5 psi) | 180kg (397lbs) | 2 adults |
| 65132 | 0.07 bar (1 psi) | 250kg (551lbs) | 3 adults |
| 65142 | 0.07 bar (1 psi) | 180kg (397lbs) | 2 adults |
| Item | Product Inflated Size | Printed Scale | Deflated Size | Inflated Size |
|---|---|---|---|---|
| 65077 | 3.21m x 1.00m (10'6" x 39") | 5cm / 10cm | 5.3cm / 11.1cm | |
| 65115 | 2.75m x 81cm (9' x 32") | 5cm / 10cm | 5.3cm / 10.8cm | |
| 65131 | 3.31m x 88cm (10'10" x 35") | 5cm / 10cm | 5.3cm / 11.1cm | |
| 65132 | 3.81m x 1.00m (12'6" x 39") | 5cm / 10cm | 5.3cm / 11.3cm | |
| 65142 | 3.12m x 98cm (10'3" x 39") | 5cm / 10cm | 5.3cm / 11.3cm |
Inflate & Assemble
NEVER USE HIGH PRESSURE AIR TO INFLATE INFLATABLES. THIS CAN DAMAGE YOUR PRODUCT.
- Inflate until some folding is visible at the welding seams. Compare the height of the printed scale on the product with the table to ensure correct chamber height.
- Inflate bottom chamber and accessories (e.g., footrest cushion) until stiff but NOT hard. DO NOT OVER INFLATE.
- Ensure correct pressure. Check pressure scales on the type-plate periodically, as sun exposure can increase pressure.
- Extended sun exposure can shorten the boat's lifespan. Do not leave in direct sunlight for more than 1 hour after use.
Assembly Steps:
Diagram Description: The manual shows diagrams illustrating the assembly process. These diagrams depict the parts included and the steps to assemble the kayak.
Included Parts (Visual Description):
- A: Kayak hull (main inflatable body).
- B: Seat(s) (inflatable or fabric seats).
- C: Fin(s) (for stability and tracking).
- D: Paddle(s) (likely collapsible or sectional).
- E: Air pump (manual air pump).
- F1, F2: Repair kit (patches and glue).
- G: Carry bag (for storage and transport).
- H: Safety rope.
- I: Valve cap(s).
Assembly Steps (Based on diagrams):
- Step 1.1: Shows inflating the main kayak chambers and attaching the seat(s) using buckles.
- Step 1.2: Depicts attaching the storage net or cargo area to the kayak.
- Step 1.3: Illustrates securing the seat(s) in place.
- Step 1.4 & 1.5: Shows how to attach the fin(s) to the underside of the kayak for stability.
- Step 2: Shows attaching multiple fins to the kayak.
- Step 3: Illustrates assembling the paddle by connecting its sections.
Safety Rope Installation
- Safety ropes must be fitted to both sides of the bow and stern areas only.
- Ensure the safety rope is tightened well.
Seats Assembly
- After inflation, connect the seat belts (if included) to the side buckles on the craft.
- Seat location can be adjusted along the center of the craft floor.
Storage
- Remove oars from oarlocks. Take down seats.
- Clean the boat with mild soap and clean water. Do not use acetone, acid, or alkaline solutions.
- Dry all surfaces gently with a cloth.
- The product can dry in direct sunlight for no more than 1 hour; prolonged exposure can shorten lifespan.
Repair
- For small punctures, follow instructions on the repair patch.
- If the hole is too big for the provided patch, purchase a Bestway repair kit or send the boat to a specialty shop.
Home Page
