Bestway BOLT X2 Kayak Owner's Manual

Product Overview

This manual provides essential information for the Bestway BOLT X2 Kayak (Model #65061E). Designed for recreational use on sheltered waters, this inflatable kayak offers a stable and enjoyable experience for up to two adults. It is manufactured in conformity with ABYC H-29 standards for sheltered waters.

Key specifications include an inflated size of 152 in. x 37 in. (3.85 m x 93 cm), a maximum load capacity of 374 lbs (170 kg), and a recommended working pressure of 0.15 bar (2 psi).

Included Components

• Inflatable Kayak (Boat)
• Oars (4x Oar Blade, 2x Shaft, 4x Coupling)
• Hand Pump
• Pressure Gauge
• Repair Patch
• Removable Fins (2 pcs)
• Footrest Tubes (2 pcs)
• Footrest Foam (2 pcs)
• Safety Ropes (2 pcs)
• Seats (2 pcs)
• Air Valves (2 pcs)
• Travel Bag

Important Safety Instructions

Adherence to safety guidelines is crucial to prevent accidents such as overturning or drowning.

• Never exceed the maximum recommended number of persons (2 adults) or the maximum load capacity (374 lbs / 170 kg).
• Always distribute weight evenly and use provided seating.
• Always wear a life jacket when using the kayak.
• Ensure all air chambers are properly inflated to the recommended pressure (0.15 bar / 2 psi).
• Be aware of water conditions, including wind, tides, and currents.
• Inspect all components (air chambers, ropes, valves) before each use.
• Avoid dragging the kayak on rough surfaces to prevent punctures.
• Operate the craft responsibly and be aware of local boating regulations.

For additional safety information, consult the U.S. Coast Guard at (800)368-5647 or www.uscgboating.org.

Setup and Inflation

Before inflating, spread the kayak on a level surface. Assemble the removable fins to the bottom of the kayak, ensuring the curvature points towards the stern.

To inflate, unscrew the air valve cap, ensure the inner spring valve is correctly positioned, attach the pump with pressure gauge, and inflate to 0.15 bar (2 psi). Securely fasten the air valve cap after inflation.

Assemble the footrests and seats, adjusting the footrests for comfort. Install safety ropes securely.

Storage and Repair

For storage, deflate the kayak by opening the air valve and pressing the spring valve. Dry all components thoroughly. Fold the kayak to remove remaining air and store in a cool, dry place.

Minor punctures can be repaired using the provided patch. For larger damage, contact Bestway or a specialized repair shop.

Support

For further assistance or product support, please visit: www.bestwaycorp.com/support