Bestway Hydro-Force Koracle X1 Inflatable Fishing Kayak

Included Accessories

• A: Repair Kit (includes patch and tube)
• B: Oar
• C: Pump
• D: Ruler/Measuring Tape
• E: Rope
• F: Oar Lock
• G: Fins (x2)
• H: Carry Bag

Owner's Manual

Important Safety Instructions

WARNING: Failure to follow these instructions may result in overturn, explosion, or drowning.

• Before each use, inspect all boat components (air chambers, grab ropes, oars, air valves) for good condition and secure attachment. Repair any damage.
• Do not exceed specified passenger numbers or load weights. Overweight can cause overturn and drowning.
• Inflate according to numbered air chambers and rated pressure. Overinflation can cause explosion or damage.
• Maintain boat balance; uneven distribution can cause overturn.
• Be aware of offshore winds and currents.
• Avoid prolonged exposure to direct sunlight, as high temperatures can cause irreparable damage due to air expansion.
• Never transport the boat while inflated on a vehicle. Be aware that liquids like battery acid, oil, or petrol can damage the boat.

Technical Safety Instructions

• Do not exceed the maximum recommended number of people or total load. Always use provided seats.
• Load the craft carefully, distributing weight evenly to maintain trim. Avoid placing heavy weights high up.
• The maximum recommended load includes people, equipment, cargo, and liquids.
• Always use pre-inspected life-saving devices like life jackets.
• Keep buckets, water scoops, and air pumps readily available for leaks or water ingress.
• All passengers must remain seated while the boat is in motion to prevent falling overboard.
• Use the boat in protected shore zones, up to 300 meters (984 feet). Be mindful of natural factors like wind, tides, and tidal waves.
• Exercise caution when landing on shore, as sharp objects (rocks, cement, shells, glass) can puncture the boat.
• If one chamber is punctured while in water, fully inflate other chambers to prevent sinking.
• Do not drag the boat on rough surfaces to avoid damage.
• Always wear a life jacket.
• The owner/operator is responsible for having a secured bucket or bailer on board.
• Adhere to safety rules to protect yourself and others.
• Follow these instructions to avoid drowning, paralysis, or other serious injuries.
• Acquire knowledge of boat operation; seek local information or training as needed. Understand local regulations and water activity dangers.

Technical Specifications

Inflation & Assembly

NEVER USE HIGH PRESSURE AIR TO INFLATE INFLATABLES. THIS CAN DAMAGE YOUR PRODUCT.

Inflate until slight folding is visible at the welding seams. Compare the printed scale on the product with the table to ensure correct chamber height. Inflate bottom chamber and accessories (like backrest) until stiff to the touch, but NOT hard. DO NOT OVER INFLATE.

Periodically check the pressure. Sunlight can increase internal pressure, requiring adjustment to the correct level.

Extended exposure to sun can shorten the boat's lifespan. Limit direct sunlight exposure to no more than 1 hour after use.

When oars are not in use, lock them into the oar clasps to prevent damage.

Storage

• Remove oars and keep all accessories for future use.
• Clean the boat using mild soap and clean water. Avoid acetone, acid, or alkaline solutions.
• Gently dry all surfaces with a cloth. The product can be air-dried in direct sunlight for a maximum of 1 hour; longer exposure can shorten its lifespan.
• Deflate all hull chambers simultaneously to ensure simultaneous pressure drop, preventing damage to inner structures. Then, deflate the floor.
• Fold the boat from front to back to expel any remaining air.

Repair

• For small punctures, use the provided repair patch according to its instructions.
• For larger holes, purchase a Bestway repair kit or consult a specialty shop for repairs.