TEGERA® 811 Synthetic PU Gloves: User Manual and Safety Information

Product Description

The TEGERA® 811 is a synthetic glove designed for precision work, featuring a palm-dipped PU coating with a smooth finish. It is constructed with carbon and nylon threads.

Key Features:

Material: Polyurethane (outer), Nylon, carbon thread (inner)
Color: Grey, White
Category: II
Intended Use: Precision work
Available Sizes (EU): 6, 7, 8, 9, 10
Packaging: 12 Pairs
Origin: Made in China

Safety Standards and Performance

Key Standards:

EN ISO 21420:2020: Protective Gloves - General Requirements and Test Methods
EN 388:2016+A1:2018: Protective Gloves Against Mechanical Risks
IEC 61340-5-1: Electrostatic Properties
EN 16350:2014: Protective Gloves - Electrostatic Properties

Performance Ratings (EN 388:2016+A1:2018):

Abrasion Resistance	Blade Cut Resistance	Tear Resistance	Puncture Resistance	Cut Resistance TDM	Impact Protection
3	1	3	1	X	P

Pictogram Explanations:

[!] 0 = Below the minimum performance level for the given individual hazard
[X] = Not submitted to the test or test method not suitable for the glove design or material
[✓] P = Pass (for Impact Protection)

Electrostatic Properties (ESD):

IEC 61340-5-1 Requirement: Maximum resistance < 1.0 x 10⁹ Ω

EN 16350:2014 Requirement: Maximum resistance < 1.0 x 10⁸ Ω

Important Notes on Performance:

For gloves with two or more layers, the overall classification of EN 388:2016 +A1:2018 does not necessarily reflect the performance of the outermost layer.
The TDM cut resistance test is the reference performance result; coupe test results are indicative due to blade dulling.
Warning: Do not use these gloves near moving elements or machinery with unprotected parts due to the risk of snagging.
Warning for ESD: The wearer must be properly earthed (e.g., by wearing adequate footwear). Do not unpack, open, adjust, or remove gloves in flammable or explosive atmospheres or while handling flammable or explosive substances. Electrostatic properties may be adversely affected by ageing, wear, contamination, and damage.

Usage and Handling

General Requirements:

All sizes comply with EN ISO 21420:2020 for comfort, fit, and dexterity, unless otherwise specified on the front page.

If a short model symbol is shown, the glove is shorter than a standard glove to enhance comfort for special purposes, such as fine assembly work.

Always wear products in a suitable size. Products that are either too loose or too tight will restrict movement and will not provide the optimal level of protection.

Inspection Before Use:

Wash and dry your hands completely before donning the gloves. Before use, inspect the gloves for any defects or imperfections and avoid wearing damaged gloves. Ensure the gloves fit well.

Removing Gloves:

When removing gloves, hold the outside edge of the glove and peel it away, holding it in the gloved hand. Use ungloved fingers to slide and peel the remaining glove off from the inside.

Caution: When handling hazardous chemicals, do not touch the outer surface of the glove.

Storage, Maintenance, and Disposal

Storage and Transport:

Ideally stored in dry and dark conditions in the original package, between +10°C - +30°C.

Care and Maintenance:

Gloves/sleeves that can be mechanically washed will carry laundry symbols. It is the customer or launderer who is responsible for the performance of the gloves after laundering when the gloves have already been used. Ejendals cannot be held liable for this.

Disposal:

Dispose of according to local environmental legislations.

Allergens

The glove contains natural rubber, which may cause allergy.

This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information, contact Ejendals.

Latex Free: Yes

Manufacturer and Contact Information

Manufacturer: Ejendals AB, Limavägen 28, SE-793 32 Leksand, Sweden

Contact: info@ejendals.com | order@ejendals.com | www.ejendals.com

UK Importer: Ejendals Ltd, Sweden House, 5 Upper Montagu Street, London, England, W1 2AG

Declaration of Conformity: Available at www.ejendals.com/conformity

Product complies with TR TS 019/2011 for Eurasian Economic Community Customs Union Members.

	TEGERA® 364 Protective Gloves - User Instructions and Specifications Detailed user instructions, safety information, and performance specifications for Ejendals TEGERA® 364 protective work gloves, including EN 388 and EN ISO 21420 compliance. Learn about fitting, care, and allergen information.
	Tegera® 618 Protective Gloves - User Instructions and Specifications Detailed user instructions, safety standards, and specifications for the Tegera® 618 protective gloves by Ejendals, covering performance levels, fitting, care, and allergen information.
	TEGERA 312 Textile Gloves - Product Information and Safety Detailed product information for TEGERA 312 textile gloves, including cut resistance, material specifications, standards (EN 388, EN ISO 21420), usage instructions, and safety warnings. Features nylon material and is suitable for precision work.
	TEGERA 8833 Winter-Lined Synthetic Work Gloves - Cut & Heat Protection Detailed instructions and specifications for TEGERA 8833 synthetic work gloves. Features include cut resistance (Level A), contact heat protection (up to 250°C), windproof, waterproof, and food handling suitability. Compliant with EN ISO 21420, EN 388, EN 407, and EN 511 standards.
	Tegera 612 Safety Gloves: EN Standards, Heat & Mechanical Protection \| Ejendals Detailed instructions and specifications for Ejendals Tegera 612 safety gloves. Covers EN ISO 21420, EN 388, EN 407 standards, heat resistance up to 100°C, water repellency, and proper usage, care, and disposal.
	TEGERA® 432 Cut Resistant Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 432 cut-resistant gloves by Ejendals, covering performance ratings, usage, care, and safety information.
	TEGERA® 227 Protective Gloves - Heat and Mechanical Resistance \| Ejendals Comprehensive guide to Ejendals TEGERA® 227 protective gloves, detailing heat and mechanical resistance standards (EN 407, EN 388), general requirements (EN ISO 21420), material specifications, sizing, and usage instructions.
	Ejendals teGera® 256 Protective Gloves: User Instructions and Safety Information Comprehensive user instructions and safety information for Ejendals teGera® 256 cut-resistant and thermal protective gloves, detailing performance standards, usage guidelines, care, and storage.

TEGERA® 811 Synthetic PU Gloves