Tegera® 618 Protective Gloves

Product Specifications

Product Description

Synthetic glove, latex foam, 3/4 dipped, foam grip pattern, 13 gg, polyester, Cat. II, black, green, water repellent palm and knuckle, for allround work.

Outer Material Specification: Natural latex

Inner Material Specification: Polyester

Size Range (EU): 7, 8, 9, 10, 11

Packaging: 12 Pairs

Origin: Made in China

Safety Standards and Performance

Complies with PPE Regulation (EU) 2016/425 and EN ISO 21420:2020.

EN 388:2016+A1:2018 Performance Levels (Mechanical Risks)

Abrasion resistance: Min. 0; Max. 4
Blade cut resistance: Min. 0; Max. 5
Tear resistance: Min. 0; Max. 4
Puncture resistance: Min. 0; Max. 4
Cut Resistance TDM (EN ISO 13997): Min. A; Max. F
Impact Protection: P=Pass

Protection levels are measured from the area of the glove palm. Warning: For gloves with two or more layers, the overall classification of EN 388:2016 +A1:2018 does not necessarily reflect the performance of the outermost layer. For dulling during the cut resistance test, the coupe test results are only indicative, while the TDM cut resistance test is the reference performance result. Do not use these gloves near moving elements or machinery with unprotected parts.

Abrasion resistance is according to the American National Standard Institute 105-2016. Levels 1-6.

EN ISO 21420:2020 General Requirements and Test Methods

Finger dexterity test: Min. 1; Max. 5

Usage and Care Instructions

Fitting and Sizing

All sizes comply with EN ISO 21420:2020 for comfort, fit and dexterity, if not explained on the front page. If the short model symbol is shown on the front page, the glove is shorter than a standard glove, to enhance comfort for special purposes, for example fine assembly work. Only wear products in a suitable size. Products which are either too loose or too tight will restrict movement and will not provide the optimal level of protection.

Storage and Transport

Ideally stored in dry and dark conditions in the original package, between +10°C - +30°C.

Inspection Before Use

Wash and dry your hands completely before donning the gloves. Before use, inspect the gloves for any defects or imperfections and avoid wearing damaged gloves. Ensure the gloves fit well. When removing your gloves, hold the outside edge of the glove and peel the glove away, holding it in the gloved hand. Use ungloved fingers to slide and peel the remaining glove off from the inside. Where hazardous chemicals are handled, do not touch the outer surface of the glove.

Shelf Life

The nature of the materials used in this product means that the life of this product cannot be determined as it will be affected by many factors, such as storage conditions and usage.

Care and Maintenance

Gloves/sleeves that can be mechanically washed will carry laundry symbols. It is the customer or launderer who is responsible for the performance of the gloves after laundering when the gloves have already been used. Ejendals cannot be held liable for this.

Disposal

According to local environmental legislations.

Allergens

The glove contains natural rubber which may cause allergy. This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information, contact Ejendals.

Latex free: No

Manufacturer Information

Ejendals ab, Limavägen 28, SE-793 32 Leksand, Sweden

Contact: info@ejendals.com | order@ejendals.com | www.ejendals.com

UK Importer: Ejendals ltd, Sweden House, 5 upper Montagu Street, London, England, W1 2AG

Declaration of Conformity: www.ejendals.com/conformity

EU-Type Examination: 2777 Satra Technology Europe Ltd, Bracetown Business Park, Clonee, Dublin 15, Dublin, Ireland.

For Eurasian Economic Community Customs Union Members: Product complies with the requirements of TR CU 019/2011 "On the Safety of Personal Protective Equipment".

	TEGERA® 364 Protective Gloves - User Instructions and Specifications Detailed user instructions, safety information, and performance specifications for Ejendals TEGERA® 364 protective work gloves, including EN 388 and EN ISO 21420 compliance. Learn about fitting, care, and allergen information.
	TEGERA® 811 Synthetic PU Gloves: User Manual and Safety Information Detailed instructions, safety standards, performance ratings (EN 388, ESD), and handling guidelines for TEGERA® 811 synthetic PU gloves by Ejendals. Suitable for precision work.
	TEGERA 312 Textile Gloves - Product Information and Safety Detailed product information for TEGERA 312 textile gloves, including cut resistance, material specifications, standards (EN 388, EN ISO 21420), usage instructions, and safety warnings. Features nylon material and is suitable for precision work.
	Tegera 612 Safety Gloves: EN Standards, Heat & Mechanical Protection \| Ejendals Detailed instructions and specifications for Ejendals Tegera 612 safety gloves. Covers EN ISO 21420, EN 388, EN 407 standards, heat resistance up to 100°C, water repellency, and proper usage, care, and disposal.
	Ejendals teGera® 256 Protective Gloves: User Instructions and Safety Information Comprehensive user instructions and safety information for Ejendals teGera® 256 cut-resistant and thermal protective gloves, detailing performance standards, usage guidelines, care, and storage.
	TEGERA® 432 Cut Resistant Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 432 cut-resistant gloves by Ejendals, covering performance ratings, usage, care, and safety information.
	TEGERA 8833 Winter-Lined Synthetic Work Gloves - Cut & Heat Protection Detailed instructions and specifications for TEGERA 8833 synthetic work gloves. Features include cut resistance (Level A), contact heat protection (up to 250°C), windproof, waterproof, and food handling suitability. Compliant with EN ISO 21420, EN 388, EN 407, and EN 511 standards.
	TEGERA® 8815 Cut Resistant Protective Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 8815 protective gloves. Features include cut resistance level F, contact heat resistance up to 100°C, food handling approval, and HPPE lining. Learn about standards EN 388, EN 407, and EN 420.