TEGERA 312

Textile Glove

Product Specific Information

Type: Textile glove

Cut Resistance Level: A

Gauge: 13 gg

Material: Nylon

Construction: Seamless

Category: Cat. II

Color: White

Intended Use: For precision work

Size Range (EU): 6, 7, 8, 9, 10

Packaging: 12 pairs

Made in: China

Importer: Ejendals Ltd, Sweden House, 5 Upper Montagu Street, London, England, W1 2AG

Manufacturer: Ejendals AB, Limavägen 28, SE-793 32 Leksand, Sweden

Conformity and Standards

Declaration of Conformity: www.ejendals.com/conformity

This product is designed to provide protection specified in PPE Regulation (EU) 2016/425.

EN ISO 21420:2020: Protective Gloves - General Requirements and Test Methods

Finger dexterity test: Min. 1; Max. 5

EN 388:2016+A1:2018: Protective Gloves Against Mechanical Risks

Protection levels are measured from the area of the glove palm.

Pictogram Explanation:

0 = Below the minimum performance level for the given individual hazard
X = Not submitted to the test or test method not suitable for the glove design or material
P = Pass (for Impact Protection)

Performance Characteristic	Rating
A. Abrasion resistance	Min. 0; Max. 4
B. Blade cut resistance	Min. 0; Max. 5
C. Tear resistance	Min. 0; Max. 4
D. Puncture resistance	Min. 0; Max. 4
E. Cut Resistance TDM (EN ISO 13997)	Min. A; Max. F
F. Impact Protection	P=Pass

Warning: Do not use these gloves near moving elements or machinery with unprotected parts.

Note: For gloves with two or more layers, the overall classification of EN 388:2016 +A1:2018 does not necessarily reflect the performance of the outmost layer. The TDM cut resistance test is the reference performance result.

Usage, Care, and Safety Information

General Warning: This product is designed to provide protection as specified, but no item of PPE can provide full protection. Caution must always be taken when exposed to risks.

Fitting and Sizing

All sizes comply with EN ISO 21420:2020 for comfort, fit, and dexterity. Wear products in a suitable size. Products that are either too loose or too tight will restrict movement and will not provide the optimal level of protection.

Storage and Transport

Ideally stored in dry and dark conditions in the original package, between +10°C and +30°C.

Inspection Before Use

Wash and dry hands completely before donning the gloves. Before use, inspect the gloves for any defects or imperfections and avoid wearing damaged gloves. Ensure the gloves fit well.

Shelf Life

The nature of the materials used means that the product's life cannot be determined as it will be affected by many factors, such as storage conditions and usage.

Care and Maintenance

Gloves/sleeves that can be mechanically washed will carry laundry symbols. The customer or launderer is responsible for the performance of the gloves after laundering when the gloves have already been used. Ejendals cannot be held liable for this.

Disposal

Dispose of according to local environmental legislation.

Allergens and Material Information

The glove contains natural rubber which may cause allergy.

Allergens: This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information contact Ejendals.

Latex Free Status: Contains natural rubber (may cause allergy). Not latex-free.

	TEGERA® 811 Synthetic PU Gloves: User Manual and Safety Information Detailed instructions, safety standards, performance ratings (EN 388, ESD), and handling guidelines for TEGERA® 811 synthetic PU gloves by Ejendals. Suitable for precision work.
	Tegera® 618 Protective Gloves - User Instructions and Specifications Detailed user instructions, safety standards, and specifications for the Tegera® 618 protective gloves by Ejendals, covering performance levels, fitting, care, and allergen information.
	TEGERA® 364 Protective Gloves - User Instructions and Specifications Detailed user instructions, safety information, and performance specifications for Ejendals TEGERA® 364 protective work gloves, including EN 388 and EN ISO 21420 compliance. Learn about fitting, care, and allergen information.
	Ejendals teGera® 256 Protective Gloves: User Instructions and Safety Information Comprehensive user instructions and safety information for Ejendals teGera® 256 cut-resistant and thermal protective gloves, detailing performance standards, usage guidelines, care, and storage.
	TEGERA® 432 Cut Resistant Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 432 cut-resistant gloves by Ejendals, covering performance ratings, usage, care, and safety information.
	TEGERA 8833 Winter-Lined Synthetic Work Gloves - Cut & Heat Protection Detailed instructions and specifications for TEGERA 8833 synthetic work gloves. Features include cut resistance (Level A), contact heat protection (up to 250°C), windproof, waterproof, and food handling suitability. Compliant with EN ISO 21420, EN 388, EN 407, and EN 511 standards.
	Tegera 612 Safety Gloves: EN Standards, Heat & Mechanical Protection \| Ejendals Detailed instructions and specifications for Ejendals Tegera 612 safety gloves. Covers EN ISO 21420, EN 388, EN 407 standards, heat resistance up to 100°C, water repellency, and proper usage, care, and disposal.
	TEGERA® 115 Protective Leather Gloves: Instructions, Specifications, and Safety Comprehensive guide for TEGERA® 115 protective leather gloves by Ejendals, detailing product specifications, EN safety standards (EN 388, EN ISO 21420), usage instructions, care, and allergen information.