Tegera® 612 Safety Gloves

Product Specific Information

Product Description

Synthetic glove, latex-dipped palm, crinkled grip pattern, 10 gg, cotton, polyester. Category II, black, grey. Withstands contact heat up to 100°C, water repellent palm. Designed for all-round work.

Specifications & Certifications

Outer Material: Natural latex

Inner Material: Cotton, polyester

Size Range (EU): 7, 8, 9, 10, 11

Standards:

EN ISO 21420:2020: Protective Gloves - General Requirements and Test Methods
EN 388:2016+A1:2018: Protective Gloves Against Mechanical Risks
EN 407:2020: Protective Gloves Against Thermal Risks (Heat and/or Fire)
EU 2016/425 PPE Regulation

EU Type Examination: 2777 Satra Technology Europe Ltd, Bracetown Business Park, Clonee, Dublin 15, Ireland

Manufacturer: Ejendals AB, Limavägen 28, SE-793 32 Leksand, Sweden

UK Importer: Ejendals Ltd, Sweden House, 5 Upper Montagu Street, London, England, W1 2AG

Declaration of Conformity: www.ejendals.com/conformity

Performance Levels

EN 388:2016 +A1:2018: Mechanical Risks

Protection levels are measured from the palm area of the glove.

Performance	Level	Description
A. Abrasion resistance	Min. 0; Max. 4	(American National Standard Institute 105-2016 Levels 1-6)
B. Blade cut resistance	Min. 0; Max. 5
C. Tear resistance	Min. 0; Max. 4
D. Puncture resistance	Min. 0; Max. 4
E. Cut Resistance TDM (EN ISO13997)	Min. A; Max. F
F. Impact Protection	P=Passed

Warning: For gloves with two or more layers, the overall classification does not necessarily reflect the performance of the outermost layer. Do not use these gloves near moving elements or machinery with unprotected parts due to entanglement risk.

EN 407:2020: Thermal Risks (Heat and/or Fire)

Performance	Level	Description
A. Limited flame spread	Min. 0; Max. 4
B. Contact heat	Min. 0; Max. 4
C. Convective heat	Min. 0; Max. 4
D. Radiant heat	Min. 0; Max. 4
E. Small splashes of molten metal	Min. 0; Max. 4
F. Large quantities of molten metal	Min. 0; Max. 4

Warning: If the glove has a performance level <1, or X in limited flame spread (EN 407:2020), it should not come in contact with naked flame. Gloves tested according to 6.6 "small splashes of molten metal" are not suitable for welding. In case of molten metal splash, the glove may not eliminate all risks of burn; the user shall leave the working place immediately and take off the glove. No flame protection.

Usage and Care

Fitting and Sizing: All sizes comply with EN ISO 21420:2020 for comfort, fit and dexterity. Use only products in a suitable size. Products that are either too loose or too tight will restrict movement and will not provide the optimal level of protection.

Storage and Transport: Ideally stored in dry and dark condition in the original package, between +10°C - +30°C.

Inspection Before Use: Wash and dry your hands completely before donning the gloves. Before use, inspect the gloves for any defects or imperfections and avoid wearing damaged gloves. Ensure the gloves fit well.

Removing Gloves: Hold the outside edge of the glove and peel the glove away, holding it in the gloved hand. Use ungloved fingers to slide and peel the remaining glove off from the inside.

Shelf Life: The life of this product cannot be determined as it will be affected by many factors, such as storage conditions, usage etc.

Care and Maintenance: Gloves/sleeves that can be mechanically washed will carry laundry symbols. The customer or launderer is responsible for the performance of the gloves after laundering when the gloves have already been used. Ejendals cannot be held liable for this.

Disposal: According to local environmental legislations.

Safety Information

⚠️ Allergens: This product contains natural rubber which may cause allergy. Do not use in case of hypersensitivity signs. For more information, contact Ejendals.

Latex Free: No

Pictogram Explanations

0: Below the minimum performance level for the given individual hazard.
X: Not submitted to the test or test method not suitable for the glove design or material.

	TEGERA® 227 Protective Gloves - Heat and Mechanical Resistance \| Ejendals Comprehensive guide to Ejendals TEGERA® 227 protective gloves, detailing heat and mechanical resistance standards (EN 407, EN 388), general requirements (EN ISO 21420), material specifications, sizing, and usage instructions.
	TEGERA 8833 Winter-Lined Synthetic Work Gloves - Cut & Heat Protection Detailed instructions and specifications for TEGERA 8833 synthetic work gloves. Features include cut resistance (Level A), contact heat protection (up to 250°C), windproof, waterproof, and food handling suitability. Compliant with EN ISO 21420, EN 388, EN 407, and EN 511 standards.
	TEGERA® 8815 Cut Resistant Protective Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 8815 protective gloves. Features include cut resistance level F, contact heat resistance up to 100°C, food handling approval, and HPPE lining. Learn about standards EN 388, EN 407, and EN 420.
	Ejendals teGera® 256 Protective Gloves: User Instructions and Safety Information Comprehensive user instructions and safety information for Ejendals teGera® 256 cut-resistant and thermal protective gloves, detailing performance standards, usage guidelines, care, and storage.
	TEGERA® 432 Cut Resistant Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 432 cut-resistant gloves by Ejendals, covering performance ratings, usage, care, and safety information.
	TEGERA® 19 Protective Gloves: User Manual and Safety Information Detailed instructions and safety information for Ejendals TEGERA® 19 welding and heat-resistant protective gloves, covering standards, performance, usage, care, and disposal.
	TEGERA® 115 Protective Leather Gloves: Instructions, Specifications, and Safety Comprehensive guide for TEGERA® 115 protective leather gloves by Ejendals, detailing product specifications, EN safety standards (EN 388, EN ISO 21420), usage instructions, care, and allergen information.
	TEGERA® 811 Synthetic PU Gloves: User Manual and Safety Information Detailed instructions, safety standards, performance ratings (EN 388, ESD), and handling guidelines for TEGERA® 811 synthetic PU gloves by Ejendals. Suitable for precision work.