TEGERA® 227 Protective Gloves

Brand: Ejendals

Product Description

Leather glove, fully lined, heat-resistant and water-repellent premium reversed cow suede, cotton, Category II. Features heat-resistant sewing thread and is flame retardant. Available in black and brown.

Performance Standards and Specifications

This product is designed to provide protection specified in PPE Regulation (EU) 2016/425. No PPE can provide full protection; always exercise caution.

EN ISO 21420:2020: Protective Gloves - General Requirements and Test Methods

Finger dexterity test: Min. 1; Max. 5

EN 388:2016+A1:2018: Protective Gloves Against Mechanical Risks

Protection levels are measured from the glove palm area. Warning: For gloves with two or more layers, the overall classification does not necessarily reflect the performance of the outermost layer. Do not use near moving machine parts due to snagging risk.

Abrasion resistance: Min. 0; Max. 4
Blade cut resistance: Min. 0; Max. 5
Tear resistance: Min. 0; Max. 4
Puncture resistance: Min. 0; Max. 4
Cut Resistance TDM (EN ISO 13997): Min. A; Max. F
Impact Protection: P=Pass

EN 407:2020: Protective Gloves Against Thermal Risks (Heat and/or Fire)

Warning: If the glove has a performance level <1, or X in limited flame spread, it should not come into contact with naked flame. Gloves tested for 'small splashes of molten metal' are not suitable for welding activities. In case of molten metal splash, the glove may not eliminate all risks of burn; the user must leave the working place immediately and take off the glove.

A: Limited flame spread
B: Contact heat
C: Convective heat
D: Radiant heat
E: Small splashes of molten metal
F: Large quantities of molten metal
Performance (A-F): Min. 0; Max. 4

Materials and Sizing

Outer Material Specification: Leather, cotton
Inner Material Specification: Polycotton
Size Range (EU): 8, 9, 10

All sizes comply with EN ISO 21420:2020 for comfort, fit, and dexterity, unless otherwise specified. If a short model symbol is shown, the glove is shorter than standard for enhanced comfort in specific tasks like fine assembly work. Ensure a suitable size for optimal protection and function.

Usage and Care

Storage and Transport: Ideally stored in dry and dark conditions in the original package, between +10°C - +30°C.
Inspection Before Use: Wash and dry hands completely before donning. Inspect gloves for defects. Avoid wearing damaged gloves. Ensure a good fit.
Removing Gloves: Hold the outer edge, peel off, and hold in the gloved hand. Use ungloved fingers to slide and peel the remaining glove off from the inside. Avoid touching the outer surface when handling hazardous chemicals.
Care and Maintenance: Mechanically washable gloves will have laundry symbols. The customer or launderer is responsible for performance after washing used gloves. Ejendals is not liable for this.
Disposal: According to local environmental legislations.

Allergen Information

The glove contains natural rubber which may cause allergy. This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. Contact Ejendals for more information.

Manufacturer and Importer

Manufacturer: Ejendals ab, Limavägen 28, SE-793 32 Leksand, Sweden

UK Importer: Ejendals ltd, Sweden House, 5 upper Montagu Street, London, England, W1 2AG

Contact: info@ejendals.com | order@ejendals.com | www.ejendals.com

Declaration of Conformity: www.ejendals.com/conformity

	Tegera 612 Safety Gloves: EN Standards, Heat & Mechanical Protection \| Ejendals Detailed instructions and specifications for Ejendals Tegera 612 safety gloves. Covers EN ISO 21420, EN 388, EN 407 standards, heat resistance up to 100°C, water repellency, and proper usage, care, and disposal.
	TEGERA 8833 Winter-Lined Synthetic Work Gloves - Cut & Heat Protection Detailed instructions and specifications for TEGERA 8833 synthetic work gloves. Features include cut resistance (Level A), contact heat protection (up to 250°C), windproof, waterproof, and food handling suitability. Compliant with EN ISO 21420, EN 388, EN 407, and EN 511 standards.
	Ejendals teGera® 256 Protective Gloves: User Instructions and Safety Information Comprehensive user instructions and safety information for Ejendals teGera® 256 cut-resistant and thermal protective gloves, detailing performance standards, usage guidelines, care, and storage.
	TEGERA® 432 Cut Resistant Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 432 cut-resistant gloves by Ejendals, covering performance ratings, usage, care, and safety information.
	TEGERA® 8815 Cut Resistant Protective Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 8815 protective gloves. Features include cut resistance level F, contact heat resistance up to 100°C, food handling approval, and HPPE lining. Learn about standards EN 388, EN 407, and EN 420.
	TEGERA® 19 Protective Gloves: User Manual and Safety Information Detailed instructions and safety information for Ejendals TEGERA® 19 welding and heat-resistant protective gloves, covering standards, performance, usage, care, and disposal.
	TEGERA® 115 Protective Leather Gloves: Instructions, Specifications, and Safety Comprehensive guide for TEGERA® 115 protective leather gloves by Ejendals, detailing product specifications, EN safety standards (EN 388, EN ISO 21420), usage instructions, care, and allergen information.
	TEGERA® 364 Protective Gloves - User Instructions and Specifications Detailed user instructions, safety information, and performance specifications for Ejendals TEGERA® 364 protective work gloves, including EN 388 and EN ISO 21420 compliance. Learn about fitting, care, and allergen information.