Lumary Smart Pathway Light User Manual

Thank you for choosing Lumary! Embark on a journey of smart living by downloading the Lumary App, your gateway to effortlessly managing your smart devices from anywhere using your smartphone or tablet. Lumary products seamlessly integrate with your home Wi-Fi, enabling you to command multiple devices with the mere touch of your fingertips. Lumary is a leading producer of smart lighting solutions, dedicated to delivering unparalleled service. We are constantly refining our app and products to ensure we meet and exceed your expectations. Illuminate your home with the sophistication and convenience of Lumary today, making your space brighter and your life smarter.

Product & Notes

What's in the Box

Lumary Pathway Light

Get Ready

Ensure you know your Wi-Fi network name and password.
Mobile Device Requirements:
- For iOS: iOS 13.3 or higher.
- For Android: Android 9.0 or higher.
Connect to a 2.4GHz Wi-Fi network. Lumary devices are not compatible with 5GHz networks.

Notes on Button Functions

The controller has a single button with the following functions:

Hold down for 5 seconds: Enter network configuration mode. Upon powering up, factory-set equipment will automatically make the lights flash.
Single press: Changes the mode.
Press twice quickly: Turns the device off. The device remembers the color or state from before it was last turned off.
Note: A long press of 5 seconds, in any mode, will initiate the network configuration mode.

Product Schematic

The Lumary Pathway Light system consists of the following components:

1. Light Source
2. Umbrella
3. Umbrella Cap
4. Light Pole
5. Ground Plug
6. M12 Female plug
7. M12 Male Plug
8. Controller
9. Power Adaptor

Installation Note: Please install carefully. Remove the protection device on top of the pole to prevent damage to the screw threads. Install the lights one by one in order, and finally check whether the connection is intact. After installation, power on and configure the app and remote control. For any questions, please contact: Support@lumary.tech.

Application Connection

Step 1: Download and Install the Lumary App

Find and install the "Lumary" App on the App Store or Google Play. The app interface shows the Lumary app listing with a 4.1-star rating and 607 reviews, available for download.

Step 2: Register a Lumary Account

Enter your email address and password to register or log into the Lumary App. Ensure you select your correct region and country.

Step 3: Connect Your Device

Note: Lumary products require a 2.4GHz Wi-Fi network. Ensure your device is powered on and in pairing mode (light is breathing or blinking).

Enable Bluetooth on your mobile device to add Wi-Fi devices more easily.
Open the Lumary App, navigate to the Devices screen, and tap the '+' icon to select "Add Device".
If the networking fails, long press the controller button for 5 seconds to enter the distribution state.
Find your device, select your Wi-Fi network, enter the password, and press "Next". Click "Add", wait patiently, then click "Done" to successfully add the device to the App.
Alternatively, in the Lumary App, tap '+' then "Lighting", select "Light Source (BLE + Wi-Fi)", and choose "AP Mode" or "EZ Mode" in the upper right corner.

The app interface displays screens for entering Wi-Fi information and confirming successful device addition (e.g., L-PL4C1). The "Add Manually" section allows selection of various device types like Light Source, Strip Lights, etc.

App Functions for You

The Lumary App features five main sections: On/Off, Colour, Scene, Music, and Plan.

3.1. On/Off

The switch button controls the power for the entire set of string lights, allowing you to turn them on or off with a single tap. The interface allows you to confirm the number of lights (Range 2-48 LEDs).

3.2. Colour

Access the Colour UI page to control the lighting colors. This page features icons for selecting "All" lights or "Single" light control, and an option to "Turn off" individual lights. You can also adjust the LED value. The interface provides color palettes for selection.

3.3. Scenes

Choose from 25 available scenes, categorized into 8 life scenes, 8 holiday scenes, and 8 mood scenes. The app also supports DIY scene creation (up to 30 scenes) and editing/saving existing scenes (up to 50). Once saved, DIY scenes appear in a dedicated column for quick access. Remember to preview your changes and click "save" to apply them.

3.4. Music Rhythm

Activate music rhythm mode to synchronize lights with music playing on your phone or other sounds. The lights will react to the rhythm of the music or sounds like notifications. Exiting music rhythm mode will stop the synchronization.

3.5. Plan

Set custom on/off times for your string lights daily. The "Add Timer" interface allows you to set specific times and select actions like "Turn off", "Turn on and dim", or "Turn on and set the scene" for selected days of the week.

Group Control

Step 1: Access Device Settings

Log in to the Lumary App, tap your smart device, and enter its settings by clicking the [edit icon] in the top right corner.

Step 2: Create a Group

Click "Create Group", then select the devices you wish to include in the group and save.

Step 3: Name and Save Group

You can reset the group name and save it. The created group can then be used to control multiple devices simultaneously.

Remote Control

The Lumary remote control can operate both networked and unconnected devices.

Remote Control Buttons:

ON/OFF: Powers the device on or off.
Brightness-/&Scene Speed-: Decreases brightness or cycles through scene speeds.
Auto Scenes cycle: Cycles through automatic scene modes.
MODE+: Cycles through lighting modes.
DIM: Adjusts brightness.
AUTO: Activates automatic mode.
DIM-: Decreases brightness.
Scenes Pause/Play: Pauses or plays current scene.
Previous Scene: Selects the previous scene.
Brightness+/&Scene Speed+: Increases brightness or cycles through scene speeds.
MODE-: Cycles through lighting modes.
Color Buttons (Red, Green, Blue): Select specific colors.
Warm White (WW): Selects warm white color temperature.
Cool White (CW): Selects cool white color temperature.

Pairing Devices with Remote:

1. For unconnected devices: Wait until the device stops flashing. Press the ON/OFF button for 3 seconds (this method is not recommended).

2. For devices connected to the network: Power off and then on the device. Long press the ON/OFF button for 3 seconds. The light will blink to indicate successful pairing.

FAQ

1. What should I do if I don't have internet access to my Lumary product?

If you lack internet access, you will need two mobile phones. Use one phone to set up a hotspot, and the other phone to connect to the hotspot and add the device via the app. Refer to the guide for detailed instructions.

2. If my Wi-Fi internet goes down, will Lumary App still work?

Lumary products require a Wi-Fi connection for remote usage. However, they can be controlled locally using the app via LAN (Local Area Network) and Bluetooth. This allows functionalities like turning on/off, dimming, adjusting color temperature, and changing colors directly through the app, even without an internet connection, provided the devices are connected to the same network or via Bluetooth.

3. Why does the flickering occur with Lumary products?

Lumary products come with factory default network configurations. If a device is not connected to the network, it will flash for three minutes each time it's powered on. Once connected, the flashing will cease. If the device is connected, it will stop flashing and automatically reconnect to the network when switched off and on via the wall switch after a 15-second interval.

4. Can I share with family and friends?

Yes, you can share access to your Lumary devices. In the Lumary App, go to your main device list, select the device, tap the "..." button for advanced settings, and click "Share Device". You can then give or revoke sharing permissions. The other user must have the Lumary App downloaded and an account registered to control the device.

5. Can I group multiple Lumary devices together?

Yes, you can group multiple devices of the same type based on room, location, or other criteria. Devices can belong to multiple groups. To create a group: From your main device list, select a device, tap the "..." button for advanced settings, select "Create Group", name the new group, and choose which devices to include.

6. My Lumary device has a funny name. How do I rename it?

From your main device list, select the device you want to rename. Press the "..." button for advanced settings. Click "Modify Device Name" (or "Modify Group Name" if renaming a group) and choose a more familiar name.

7. What's the wireless range?

The wireless range is largely determined by your home router and room conditions. For precise information, refer to your router manufacturer's specifications regarding coverage area and range capabilities.

8. What should I do if the device appears offline or is unreachable?

Ensure your Wi-Fi router is online and within range. Check for the latest Lumary functionality by clicking "Check for firmware update" in device settings. If issues persist, try these steps: a. Turn off the Lumary device. b. Clear the application cache on your mobile device. c. Reboot the router. d. Wait one minute, then turn the Lumary device back on. e. After five minutes, check the device status. These steps help resolve connectivity issues.

9. How many devices can I control?

Maximum number of timers per device: 30
Maximum number of devices per home: 120
Maximum Tap-to-Run per home: 100
Maximum Automation per home: 100
Maximum tasks in Tap-to-Run: 150
Maximum tasks in Automation: 150
Maximum conditions in Automation: 10
Maximum mobile devices logged in simultaneously: 200
Maximum Homes per App account: 20
Maximum home members per home: 20
Maximum rooms per home: 20
Maximum devices per room: 50
Maximum devices per device group: 100
Maximum device groups per home: 20
Maximum shared device groups: 20
Maximum shared devices: 20
Maximum invited App accounts: 20

10. What should I do when I find a problem with the purchased product?

Please email support@lumary.tech with your Amazon order ID. Lumary is dedicated to ensuring your satisfaction and will happily exchange a faulty product for a new one immediately.

Important Information

Troubleshooting

Unable to Connect to Your Wi-Fi Network: Please ensure you entered the correct Wi-Fi password during setup. Check for potential internet connection issues. If the Wi-Fi signal is weak, consider resetting your Wi-Fi router and attempting to connect again.

Parameter Information

Name	Lumary Pathway Light
Model	L-PL4C1
Input Voltage	100-130VAC, 60Hz
Lights Qty	4PCS
Color Temperature	RGBA+WW+CW
Operating Temperature	-20℃~45℃ (-4°F~113°F)
IP Rating	IP65
Beam Angle	100°
Rated Life	15000h

Certifications: FC, RoHS, CE. FCC ID: 2ANDL-CBU. Made in China.

CAUTION: FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try correcting the interference by one or more of the following measures: Reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult a dealer or experienced radio/TV technician.

Voice Control Guide

Name and Control Each Device by Voice.

Works with Alexa

Voice Control Quick Guide for Amazon Alexa:

Log in to the Lumary App, tap the smart device, and enter settings by clicking the [edit icon].
Tap "Alexa" in the "Third-party Control" section.
Tap "Sign In With Amazon".
Tap "Allow" to link.

Linked successfully. When adding new devices, there is no need to link again; simply discover the new device in Alexa.

To control your Lumary smart device, ask Alexa. Ensure your devices are already set up using the Lumary app.

Example Commands:

"Alexa, discover my devices."
"Alexa, turn on the bedroom light."
"Alexa, set the bedroom light to orange."
"Alexa, turn off the coffee machine."
"Alexa, set the living room to 50%."
"Alexa, dim porch light."

*Some commands require compatible devices.

Works with Hey Google

Voice Control Quick Guide for Google Assistant:

Log in to the Lumary app, tap the smart device, and enter settings by clicking the [edit icon].
Tap "Google Assistant" in the "Third-party Control" section.
Tap "Link with Google Assistant".
Click "Agree and link".

Linked successfully. When adding new devices, there is no need to link again; simply discover the new device in Google Home.

To control your Lumary smart device, say "Hey Google" and ask. Ensure your devices are already set up using the Lumary app.