Lumary Smart RGBAI Linear Light User Manual

Brand: Lumary

Welcome

Thank you for choosing Lumary products! Get started by downloading the Lumary App to easily manage your smart devices from your phone or tablet. Our devices connect to your home Wi-Fi, allowing fingertip control of multiple devices. Lumary is a professional smart lights producer committed to top-tier service and product optimization. Light up your home with Lumary!

Product & Notes

What's in the Box

Lamp body (1PCS)
Plug cable (1PCS)
Expansion tube (2PCS)
Fixed head 2 (2PCS)
Screw (2PCS)
Fixed head 1 (2PCS)
Steel wire rope (2PCS)
Wire locker (2PCS)
Screw (2PCS)
Steel wire rope (2PCS)

Diagram Description: An illustration shows the components of the Lumary Smart RGBAI Linear Light package, including the lamp body, cables, mounting hardware like screws and expansion tubes, and wire ropes.

Get Ready

Know your Wi-Fi network and password.
Ensure your mobile device runs iOS 13.3 or higher and Android 9.0 or higher.
Connect to a 2.4GHz Wi-Fi network (Lumary does not support 5GHz networks).

Safety Information

Please read carefully and save these instructions. When using electrical equipment, follow basic safety precautions:

WARNING:

Read the specification first to ensure the service environment matches the conditions before use.
Confirm the applicable power supply before using.
Ensure the product switch is off before connecting to the power supply to prevent electric shock.
Operating against rules may damage property or cause personal harm.
Estimate the required quantity of LED linear lights and calculate total power based on single linear power rating to plan the power supply.
Dangerous high voltage; non-professionals are not allowed to maintain the products.
If the exterior flexible cable or wire is damaged, it must be exchanged by the supplier, its agent, or other qualified personnel to avoid dangers.

Diagram Description: Illustration of mounting hardware including screws, wall plugs, and wire connectors.

Installation Steps

Plan the distance between installation holes. Drill two 3mm holes and one 7mm hole in the ceiling, and insert the rubber plugs into the 3mm holes with a hammer.
Thread a screw through Fixed Head 2 and use a screwdriver to secure Fixed Head 2 into the rubber plug.
Rotate and tighten the assembled lamp with Fixed Head 1 and Fixed Head 2.
Install the steel wire rope onto the lamp using the wire locker, twist the screws, and finally plug in the plug cable. The installation is complete.

Remote Button Function

Diagram Description: A diagram of the Lumary remote control shows buttons for Indicator, Light switch (on/off), CCT, RGB, Brightness (+/-), Color switch, Scene selection (Night, Daily, Streamer, Party, Leisure, Rhythm), and Timer functions (1H, 2H). It also indicates functions like local music rhythm on/off and color light mode.

Light Reset and Pairing

The light enters the reset distribution state:

Power the lights on and off 3 times; lights will appear flashing or breathing.
Long press the remote control ON/OFF button for 5 seconds; the light will appear blinking or breathing.

Remote Control Pairing:

First, the light needs to be bound to the Lumary App.
Unplug and power the device on again. Within 20 seconds, it will be in pairing mode. Long press the remote control ON/Off button for 2-3 seconds. The white light will flash 3 times when pairing is successful.

Install the "Lumary" App

Find and install the "Lumary" App on the App Store or Google Play.
Register a Lumary account by entering your email address and following the prompts.
Log into the App. Note: Please select your region and country correctly.

Diagram Description: Screenshots show the Lumary app listing on the App Store and Google Play, and the registration/login screens within the app.

Connecting the Device

NOTE: Lumary's products cannot connect to 5GHz networks.

Steps:

Enable Bluetooth on your mobile device to add Wi-Fi devices easily.
Each time the device is powered on without a distribution network, confirm the light is in breathing or blinking pairing mode.
Open the Lumary App. In the top corner of the Devices screen, click "+" and select "Add Device" to confirm the device is paired.
If not paired, use the wall switch to reset: on-off-on-off-on.
Find the device, choose your Wi-Fi network, enter the password, and press "Next". Click "Add", wait patiently, then click "Done". The device is successfully added to the App.
Alternative connection: Open the Lumary App, click "+" in the top corner, choose "Lighting", select "Light Source (BLE + Wi-Fi)", then select "AP Mode" or "EZ Mode" in the upper right corner.

Diagram Description: Screenshots illustrate the Lumary App interface for adding devices, selecting Wi-Fi networks (showing a 2.4GHz network as not 5GHz), and confirming successful device addition.

Troubleshooting

Can't connect to your Wi-Fi network: Ensure the correct Wi-Fi password was entered during setup. Check for Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Wi-Fi internet goes down: Lumary products require Wi-Fi for remote use. They can be controlled via LAN or Bluetooth for basic functions like on/off, dimming, color temperature, and colors.
Flickering: Products are factory set to default network configuration. If not connected to the network, they flash for three minutes upon powering on. Once connected, flickering stops, and it automatically reconnects within 15 seconds of being switched off and on via the wall switch.
Device appears offline or unreachable: Ensure your Wi-Fi router is online and in range. Check for the latest firmware updates in device settings. Try turning off the device, clearing the app cache, rebooting the router, and then turning the device back on after one minute. Check the device status after five minutes.

Group Control

You can group multiple Lumary devices together by room, location, or any other preference. Devices can belong to multiple groups.

Log in to the Lumary App, tap the smart device, and enter its settings by clicking the icon in the top right corner.
Click "Create Group", then select the devices you want to group and save.
You can rename the group and save it. The group can then control the selected devices.

Diagram Description: Screenshots show the Lumary App interface for accessing device settings, creating a group, selecting devices to add to a group, and naming the group.

UI Function Introduction

The Lumary App allows control over main and auxiliary lights, scenes, and color settings.

Main Light: Adjust brightness and color temperature.
Auxiliary Light: RGBAI setting UI for adjusting color and saturation using a color disk. Features include paint bucket filling, eraser mode, color transition, music rhythm sync, and pre-set scenes (Scenery, Life, Festival, Mood).

Note: The main light and auxiliary light cannot be turned on simultaneously. Press and hold any icon to enter the new UI.

Diagram Description: Screenshots illustrate the Lumary App interface for controlling main and auxiliary lights, selecting colors, applying effects, and choosing scenes.

FAQ

No Internet Access: If you don't have a network, use two mobile phones: one to set up a hotspot, and the other to connect to the hotspot and add the device via the app.
Wi-Fi Internet Down: Lumary products need Wi-Fi for remote control. Basic functions can be controlled via LAN or Bluetooth.
Flickering: Products flash for three minutes when powered on if not connected to the network. They stop flashing and reconnect automatically once connected.
Sharing Devices: Share access via the "Share Device" option in the app's device settings. The recipient must have the Lumary App installed and an account.
Grouping Devices: Group same-type devices by room, location, etc. Select devices in the app's advanced settings to create and name a group.
Renaming Devices: In advanced settings, select "Modify Device Name" or "Modify Group Name" to rename your Lumary device or group.
Wireless Range: Dependent on your home router and room conditions. Check router specifications for exact range data.
Device Offline/Unreachable: Check router status, firmware updates, and try troubleshooting steps like clearing cache and rebooting the router.
Device Control Limits:
- Timers per device: 30
- Devices per home: 120
- Tap-to-Run per home: 100
- Automations per home: 100
- Tasks per Tap-to-Run: 150
- Tasks per Automation: 150
- Conditions per Automation: 10
- Simultaneous mobile logins: 200
- Homes per App account: 20
- Home members per home: 20
- Rooms per home: 20
- Devices per room: 50
- Device groups per home: 20
- Shared device groups: 20
- Shared devices: 20
- Invited App accounts: 20
Product Problems: Email support@lumary.tech with your Amazon order ID for assistance or exchange.

Important Information

Troubleshooting Recap

If you cannot connect to your Wi-Fi network, ensure the password is correct and check for internet connection issues. Reset your router if the Wi-Fi signal is weak.

Parameter Information

Name	Value
Name	Lumary Smart RGBAI Linear Light
Model	L-LL4A1
Input Voltage	100-277VAC, 60Hz
Wattage	Max. 40W
Color Temperature	RGBAI + Tunable White (2200K-6500K)
CRI	90+
Lumens	3000lm (6500K)
Beam Angle	108°
Rated Life	25000h

Symbols: FCC logo, RoHS compliant symbol.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

Made in China

Voice Control Guide

General

Name and control each device by voice.

Works with Alexa

To control your Lumary smart device, ask Alexa. Make sure your devices are set up using the Lumary app.

Example commands:

"Alexa, discover my devices."
"Alexa, turn on the bedroom light."
"Alexa, set the bedroom light to orange."
"Alexa, turn off the coffee machine."
"Alexa, set the living room to 50%."
"Alexa, dim porch light."

*Some commands require compatible devices.

Linking with Amazon Alexa

Log in to the Lumary App, tap the smart device, and enter settings (icon in the top right).
Tap "Alexa" in Third-party Control.
Tap "Sign In With Amazon".
Tap "Allow" to sign in to Lumary.
Linked successfully. When adding new devices, no re-linking is needed; just discover new devices in Alexa.

Diagram Description: Screenshots show the Lumary App interface for linking with Alexa and the Amazon sign-in process.

Works with Google Assistant

To control your Lumary smart device, say "Hey Google" and ask. Make sure your devices are set up using the Lumary app.