Lumary Neon Rope Light User Manual

Product & Notes

What's in the Box

• Lumary Neon Rope Light

Get Ready

• Know your Wi-Fi network and password.
• Ensure your mobile device meets requirements: iOS 13.3 or higher, or Android 9.0 or higher.
• Connect to a 2.4GHz Wi-Fi network; Lumary devices are not compatible with 5GHz networks.

Notes

The package typically includes a U-shaped bracket, a pin, screws, and the LED rope light with a USB connector. The button functions are as follows:

• 1. Network Configuration Mode: Hold the button for 5 seconds to enter network configuration mode. Upon powering up, factory-set equipment will automatically make the lights flash.
• 2. Mode Change: A single press changes the mode, cycling through various options.
• 3. Power Off: Pressing the button twice quickly turns the device off. It remembers the last color or state.
• Note: A long press of 5 seconds, in any mode, will initiate the network configuration mode.

Installation

Installation Diagram

Bending Direction Matters: Bend the rope light in the correct direction for lateral curvature, ensuring it's along the luminous surface. Avoid wrong bending directions such as reverse bends or special-shaped bends, which can damage the product.

Installation Method 1: Fastener Installation

1. Ensure the installation surface is clean and smooth.
2. Fasten the provided bracket to the mounting surface using screws.
3. Press the LED rope light into the buckle to complete the installation.

Installation Method 2: Ground Plug Installation

1. Select a suitable installation environment as required.
2. Secure the ground insert into the installation surface.
3. Press the LED rope light into the buckle to complete the installation.

The rope light can be installed in suitable scenes as needed. For questions, contact support@lumary.tech for guidance and support.

Install the "Lumary" App

Find and install the "Lumary" App on the Apple App Store or Google Play. The app allows for managing smart devices, controlling brightness, color temperature, and selecting from millions of colors. It is designed for smart living, making it simple and joyful.

Account Registration and Connection:

1. Register a Lumary account by entering your email address and selecting your region and country.
2. Log into the App.
3. Connect Device: Lumary's products require a 2.4GHz Wi-Fi network. Enable Bluetooth to easily add Wi-Fi devices. When the device is powered on without a network, confirm the light is in pairing mode (breathing or blinking). Open the Lumary App, navigate to the Devices screen, click "+", and select "Add Device". If the light is not blinking, long-press the button for 5 seconds to confirm it is blinking.
4. Find the device, choose your Wi-Fi network, enter the password, and press "Next". Click "Add" and wait. Once successfully added, click "Done".
5. Alternatively, use "AP Mode" or "EZ Mode" found in the upper right corner of the "Add Device" screen after selecting "Lighting" > "Light Source (BLE + Wi-Fi)".

Troubleshooting

Wi-Fi Connection Issues

1. Cannot connect to Wi-Fi: Ensure the correct Wi-Fi password was entered. Check for internet connection problems. If the Wi-Fi signal is weak, reset your Wi-Fi router and try again.
2. Binding Failures: If you fail to bind, use two phones: one to set up a hotspot, and the other to connect to the hotspot and add the device via the app. If the device is successfully added, check your router settings for MAC and DHCP restrictions, as Lumary products do not support 5GHz networks.
3. Flickering: Lumary products have factory default network configurations. If the device is not connected to the network, it will flash for three minutes upon powering on. Once connected, flashing ceases. If connected, it will stop flashing and automatically reconnect after being switched off and on via the wall switch (with a 15-second interval).

Device Offline or Unreachable

1. Ensure your Wi-Fi router is online and within range.
2. Check for the latest Lumary firmware updates in your device settings.
3. If issues persist:
• a. Turn off the Lumary device.
• b. Clear the application cache on your mobile device.
• c. Reboot the router.
• d. Wait one minute, then turn the Lumary device back on.
• e. After five minutes, check the device status.

These steps help resolve connectivity issues and ensure optimal performance.

App Functions

3.1. On/Off

The switch button controls the power for the entire set of string lights, allowing you to turn them on or off with a single tap. You can also adjust the actual length of the light strip if it has been cut during use.

3.2. Colour

After connection, the app defaults to the Colour UI. This interface features two icons and a digital display. Click the icons to switch between color format choices. You can select all colors, control individual lights, turn off individual light control, or adjust color transitions.

3.3. Scene

The app offers 44 different scene modes and supports DIY scenes (50+). You can edit and save your favorite scenes. Remember to preview and save your custom scenes.

3.4. Music Rhythm

Activate music rhythm mode to synchronize lights with music or other sounds. The lights will follow the rhythm of music played on your phone or react to other sounds like notifications or incoming calls. Exiting music rhythm mode stops synchronization.

3.5. Plan

Set the on/off time for the string light daily. You can configure timers for specific actions like turning the light on/off, dimming, or setting a scene.

Group Control

1. Log in to the Lumary App, tap the smart device, and click the "..." icon in the top right corner.
2. Tap "Create Group" and select the devices you wish to group.
3. Name the new group and save it. Devices in the same group can be controlled together.

Remote Control

The remote control operates both networked and unconnected devices. Key buttons include ON/OFF, MODE+, DIM, MODE-, Brightness/Speed adjustment, Auto Scenes cycle, Scenes Pause/Play, Previous Scene, Next Scene, and color selection (Red, Green, Blue, Warm White, Cool White).

• For unconnected devices: Wait until the device stops flashing. Press the on/off button for 3 seconds (not recommended).
• For connected devices: Power the device off and then on. Long press the on/off button for 3 seconds. The light will blink to indicate successful pairing.

FAQ

1. What should I do, if I don't have internet access to my Lumary product?

You will need two mobile phones: one to set up a hotspot, and the other to connect to the hotspot and add the device via the app.

2. If my Wi-Fi internet goes down, will Lumary App still work?

Lumary products require Wi-Fi for remote usage but can be controlled locally via LAN and Bluetooth even without internet, provided devices are on the same network or connected via Bluetooth.

3. Why does the flickering occur with Lumary products?

Flickering occurs with factory default network configurations. Once connected to the network, the flashing ceases. The device will automatically reconnect after being switched off and on.

4. Can I share with family and friends?

Yes, go to your main device list in the Lumary App, click on the device, press the "..." button for advanced settings, and click "Share Device". You can give or revoke permissions. The other user must have the Lumary App installed and an account registered.

5. Can I group multiple Lumary devices together?

Yes, you can group devices by room, location, or other criteria. Devices can belong to multiple groups. To create a group, select a device from your list, tap the "..." button, select "Create Group", name it, and choose devices to include.

6. My Lumary device has a funny name. How do I rename it?

From your main device list, select the device, press the "..." button, click "Modify Device Name" (or "Modify Group Name"), and choose a new name.

7. What's the wireless range?

The wireless range depends on your home router and room conditions. Refer to your router manufacturer's specifications for details.

8. What should I do if the device Appears offline or is unreachable?

Ensure your Wi-Fi router is online and within range. Check for firmware updates. If issues persist, turn off the device, clear app cache, reboot the router, wait, and turn the device back on. Check status after five minutes.

9. How many devices can I control?

• Max timers per device: 30
• Max devices per home: 120
• Max Tap-to-Run per home: 100
• Max Automations per home: 100
• Max tasks in Tap-to-Run: 150
• Max tasks in Automation: 150
• Max conditions in Automation: 10
• Max mobile devices logged in simultaneously: 200
• Max Homes per App account: 20
• Max home members per home: 20
• Max rooms per home: 20
• Max devices per room: 50
• Max devices per group: 100
• Max device groups per home: 20
• Max device groups shared with users: 20
• Max devices shared with users: 20
• Max App accounts invited by other homes: 20

10. What should I do, when I find a problem with the purchased product?

Email support@lumary.tech with your Amazon order ID. Lumary is dedicated to ensuring 100% satisfaction and will exchange faulty products.

Important Information

Troubleshooting Unable to Connect to Your Wi-Fi Network

Ensure the correct Wi-Fi password was entered during setup. Check for potential Internet connection issues. If the Wi-Fi signal is weak, consider resetting your Wi-Fi router and attempting to connect again.

Parameter Information

Certifications include FCC, RoHS, and CE. FCC ID: 2ANDL-CBU. Made in China.

CAUTION

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. The equipment has been tested and found to comply with Class B digital device limits designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a technician.

Voice Control Guide

Name and Control Each Device by Voice

Lumary devices are compatible with Amazon Alexa and Google Assistant.

Voice Control Quick Guide for Amazon Alexa

1. Log in to the Lumary App, tap the smart device, and click the "..." icon.
2. Tap "Alexa" under Third-party Control.
3. Tap "Sign In With Amazon".
4. Allow access.
5. Once linked, new devices are automatically discovered by Alexa.

Example Commands: "Alexa, discover my devices.", "Alexa, turn on the bedroom light.", "Alexa, set the bedroom light to orange.", "Alexa, turn off the coffee machine.", "Alexa, set the living room to 50%.", "Alexa, dim porch light."

Voice Control Quick Guide for Google Assistant

1. Log in to the Lumary App, tap the smart device, and click the "..." icon.
2. Tap "Google Assistant" under Third-party Control.
3. Tap "Link with Google Assistant".
4. Click "Agree and link".
5. Once linked, new devices are automatically discovered in Google Home.

Example Commands: "Hey Google, turn on all the lights in my bedroom.", "Hey Google, turn off the light.", "Hey Google, set the bedroom light to orange.", "Hey Google, turn off the coffee machine.", "Hey Google, set the living room to 50%."

After Sales & Social Media

For questions about product settings or operations, please contact customer service via email at support@lumary.tech. You can also find Lumary on social media platforms by searching for their usernames: Facebook: @lumary.official, X: @lumary_official, Instagram: @lumary.official, Pinterest: @lumary_official, YouTube: @lumary.official, Reddit: @Lumarysmartlight, TikTok: @lumary.official.

Visit Lumary online at www.lumary.tech and www.lumarysmart.com.