Lumary Wall Washer Light User Manual
Thank you for purchasing Lumary products. Ready to get started? Download the Lumary App to manage your devices straight from your phone and tablet. Easily connect to your home Wi-Fi and control multiple devices with touching fingertips. Thank you for your support, we will be dedicated to your service and continue to optimize the application and products.
Product & Notes
What's in the Box
- Lumary Smart Devices
- Lumary Wall Washer Light
Get Ready
- Know your Wi-Fi network and password.
- Make sure your mobile device is running iOS 13.3 or higher and Android 9.0 or higher.
- Make sure you're connecting to a 2.4GHz Wi-Fi network (Lumary can't connect to 5GHz networks).
Notes
Button Functions:
- Long press 5s to enter the network configuration mode. When the factory equipment is powered on, the lights will flicker automatically.
- Tap the button, the mode is different each time.
- Press twice in a row: OFF (Open will remember the color or state before the last close.)
- (Note: Long press for 5s in any mode will enter the network configuration state.)
Application Connection
Step 1: Find and Install the Lumary App
Search for and install the "Lumary" App on the App Store or Google Play. The app interface shows the Lumary app with options for Home, Brightness, and CCT Adjustable.
Links to download the app are available for both the App Store and Google Play.
Step 2: Register a Lumary Account
Enter your email address and password to log into the App. Ensure you select your correct region and country.
Step 3: Connect the Device
Note: Lumary's products cannot connect to 5GHz networks.
Steps:
- Enable Bluetooth to easily add Wi-Fi devices.
- When the device is powered on without a network connection, confirm the light is breathing or blinking in pairing mode.
- Open the Lumary App. In the top corner of the Devices screen, click "+" and select "Add Device" to confirm the device is paired.
- If the device is not pairing, use the wall switch to reset: turn it on-off-on-off-on.
- Find the device, choose your Wi-Fi network, enter the password, and press "Next".
- Click "Add" and wait patiently. After successful addition, click "Done".
- Alternatively, open the Lumary App, click "+" in the top corner, choose "Lighting", select "Light Source (BLE + Wi-Fi)", and then select "AP Mode" or "EZ Mode" in the upper right corner.
The "Enter Wi-Fi Information" screen prompts you to choose your Wi-Fi network and enter the password. It displays "Linksys" as the network and "Linksys&2022" as the password. A note indicates "This isn't 5GHz networks." The "Add Device" screen shows multiple "Lumary Wall Washer Light" entries with "Added successfully".
Troubleshooting
1. Cannot connect to Wi-Fi network
Ensure the correct Wi-Fi password was entered during setup. Check for internet connection problems. If the Wi-Fi signal is weak, reset your Wi-Fi router and try again.
2. Binding failure
You may need two phones: one to set up a hotspot and the other to connect to the hotspot and add the device via the app. If the device is successfully added, the issue might be with your router's MAC and DHCP restrictions. Lumary products do not support 5GHz networks.
3. Questions
Contact Lumary via email at support@lumary.tech or leave a message on their official social media accounts.
App Functions for You
The Lumary App offers five main sections: On/Off, Colour, Scene, Music, and Plan.
3.1. On/Off
This function acts as an analog key switch to control the entire set of string lights.
The "Lumary Wall Washer Light" screen shows a grid of lights, with controls for "Colour" and "White" modes, a "Value" slider (100%), and navigation buttons for "Dimmer", "Scene", "Music", and "Other".
3.2. Colour
After successful connection, this screen allows color selection. It features 3 icons and 1 digital display.
The Colour UI page displays icons for "Select all colors", "Individual bulb control color", and "Individual light bulb control turn off".
3.3. Scene
There are 54 scene modes, categorized into Mood (12), Festival (21), Life (8), Colour (5), Scenery (8), and Collection (8). You can edit and bookmark DIY scenes. After editing, preview and save. Saved DIY scenes will appear the next time you open this page.
The Scene screen shows categories like "recommend", "collect", "custom", and tabs for "Mood", "Festival", "Life", "Color". It displays various pre-set scenes like "In riotous profusion", "Dazzling", "Gorgeous", "Blue sky", "Ocean", "Sunflower", etc. Another screen shows an "Add" button for creating custom scenes.
3.4. Music Rhythm
When the music rhythm mode is active, the light string will synchronize with music. This can be achieved by playing music from a connected music app or by the device picking up ambient sounds through the phone's microphone. If you exit music rhythm mode, the synchronization stops.
The Music Rhythm screen offers "Local mode" and "App mode". "Local mode" uses the device microphone, while "App mode" uses the phone's microphone. Options include "Rock", "Jazz", "Classic", "Music rhythm", "Game", and "Romantic".
3.5. Plan
This feature allows users to set custom on/off times for the string lights daily. The screen shows "Countdown" and "Timing" options, with a note about potential timing errors of about 30 seconds. It also includes device settings like "Device Information", "Tap-to-Run and Automation", "Offline Notification", "Share Device", "Create Group", "FAQ & Feedback", "Add to Home Screen", "Check Device Network", and "Device Update".
Group Control
1. Log in and select device
Log in to the Lumary App, tap the smart device, and click the settings icon (represented by a pencil icon) in the top right corner.
2. Create Group
Click "Create Group", select the devices you want to group, and save. Devices in the same group can be controlled together.
3. Name and Save Group
You can reset the group name and save it. The group can then be used to control devices. The app interface shows a "Create Group" screen where devices can be added and named.
Frequently Asked Questions (FAQ)
1. No Internet Access
If you don't have a network, use two mobile phones: one to set up a hotspot and the other to connect and add the device via the app.
2. Wi-Fi Internet Down
Lumary products require Wi-Fi for remote use. They can also be controlled via LAN or Bluetooth for functions like on/off, dimming, color temperature, and colors.
3. Flickering Lights
Products are factory set to default network configuration. If not connected to a network, they will flash for three minutes upon power-on. Once connected, they stop flashing and reconnect automatically within 15 seconds of being switched off and on via the wall switch.
4. Sharing Devices
Share access to Lumary devices via the "Share Device" option in the app's device list. The other user must have the Lumary App downloaded and an account registered.
5. Grouping Devices
Group multiple same-type devices by room, location, or any preference. Devices can belong to multiple groups. Use the "..." menu for advanced settings and "Create Group" to name and select devices.
6. Renaming Devices
From the device list, select a device, go to advanced settings via the "..." menu, and choose "Modify Device Name" or "Modify Group Name" to set a new, familiar name.
7. Wireless Range
The wireless range depends on your home router and room conditions. Consult your router specifications for exact data.
8. Device Offline/Unreachable
Ensure your Wi-Fi router is online and in range. Check for firmware updates in device settings. Try turning off the device, clearing the app cache, rebooting the router, and then turning the device back on after one minute.
9. Device Control Limits
Maximum timers per device: 30. Maximum devices per home: 120. Maximum Tap-to-Run per home: 100. Maximum Automations per home: 100. Maximum tasks per Tap-to-Run/Automation: 150. Maximum conditions per Automation: 10. Simultaneous logins per account: 200. Maximum Homes per account: 20. Maximum home members: 20. Maximum rooms per home: 20. Maximum devices per room: 50. Maximum device groups per home: 20. Maximum shared device groups/devices: 20. Maximum invited accounts: 20.
10. Product Problems
Email support@lumary.tech with your Amazon order ID. Lumary is dedicated to ensuring satisfaction and will exchange faulty products.
Important Information
Troubleshooting
Cannot connect to Wi-Fi network. Make sure you entered the correct Wi-Fi password during setup. Check for internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Parameter Information
| Name | Value |
|---|---|
| Lumary Wall Washer Light | |
| Model | L-WWL41A1 |
| Input Voltage | 100-130VAC, 60Hz |
| Lights Qty | 4PCS |
| Color Temperature | RGBAI+WW+CW(2200-6500K) |
| Operating Temperature | -20℃~45℃ (-4°F~113°F) |
| IP Rating | IP65 |
| Beam Angle | 100° |
| Rated Life | 15000h |
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If harmful interference occurs, try measures like reorienting the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a technician.
Voice Control Guide
Name and Control Each Device by Voice
Voice Control Quick Guide for Amazon Alexa
1. Log in to the Lumary App, tap the smart device, and click the settings icon (pencil icon) in the top right corner.
2. Tap "Alexa" under Third-party Control.
3. Tap "Sign In With Amazon".
4. Tap "Allow" to sign in to Lumary.
5. Linking is successful. When adding new devices, you do not need to link again; simply discover the new device in Alexa.
To control your Lumary smart device, ask Alexa. Ensure devices are set up using the Lumary app. Example commands: "Alexa, discover my devices," "Alexa, turn on the bedroom light," "Alexa, set the bedroom light to orange," etc.
Voice Control Quick Guide for Google Assistant
1. Log in to the Lumary App, tap the smart device, and click the settings icon (pencil icon) in the top right corner.
2. Tap "Google Assistant" under Third-party Control.
3. Tap "Link with Google Assistant".
4. Click "Agree and link".
5. Linking is successful. When adding new devices, you do not need to link again; simply discover the new device in Google Home.
To control your Lumary smart device, say "Hey Google" and ask. Ensure devices are set up using the Lumary app. Example commands: "Hey Google, turn on all the lights in my bedroom," "Hey Google, turn off the light," etc.
Contact & Support
For questions about use and operation, contact Lumary support.
Customer Service Email: support@lumary.tech
You can also search for Lumary's account name and enter URLs on social media platforms or visit:
- Facebook: US-Smart Home (facebook.com/Lumary-Smart-Lighting-102878658675054)
- YouTube: Lumary Official (youtube.com/channel/UCcEQnWxockzsPwyPOfSppug)
- Instagram: lumary Smart Home (instagram.com/lumarysmartlights/)
- Twitter: Lumary @Lumarysmarthome (twitter.com/Lumarysmarthome)
- Pinterest: Lumary Smart Home (pinterest.com/LumarySmartHome/)
If you can't connect or need help, Lumary support is available. Visit: www.lumary.tech, www.lumarysmart.com.
