Momcozy M5 Wearable Breast Pump

Components

Washable Parts: Diaphragm, Valve, Flange, Milk Collector

Non-washable Parts: Pump Motor, Dust Cover

Step 1: Nipple Measurement

Accurate nipple measurement is crucial for optimal milk production, preventing nipple damage, and ensuring effective pumping. Measure your nipple diameter.

Recommended Flange Sizes:

• 11-13 mm
• 13-15 mm
• 15-17 mm
• 17-20 mm
• 20-23 mm
• 23-26 mm

A correctly fitted flange maximizes milk production.

Step 2: Assembly

Assemble the breast pump components as follows:

1. Attach the valve to the milk collector.
2. Insert the diaphragm into the pump motor.
3. Connect the flange to the milk collector.
4. Attach the pump motor to the assembled flange and milk collector.

Ensure all parts are securely connected.

Step 3: Wearing the Breast Pump

Place the breast pump into your nursing bra, ensuring a snug fit against your breast with no gaps.

Tips for Proper Fit:

• Ensure the breast pump is centered over your nipple.
• The breast pump should feel comfortable and secure.

Step 4: Operation

Buttons:

• On/Off/Pause: Long press to turn the device on or off. Short press to pause or resume pumping.
• Mode Selection: Switch between different pumping modes.
• Increase/Decrease: Adjust suction levels.

Modes:

• Stimulation: Fast, short suction pattern to initiate milk flow.
• Pumping: Slower suction pattern for milk expression.
• Mixed: Combines fast/short and slow/long suction patterns.

LED Display Indicators:

• Low Battery: Blinking indicator.
• Charging: One light illuminates at a time.
• Fully Charged: All lights remain solid.

Step 5: Cleaning and Maintenance

Replace washable parts every 1-3 months.

Cleaning Instructions:

• Wash all washable parts (flange, milk collector, valve, diaphragm) with warm, soapy water.
• Rinse thoroughly and air dry.
• Do not immerse the pump motor in water. Wipe it with a damp cloth if necessary.

Ensure parts are kept away from the edges of heated containers during cleaning.