Three Mode WiFi Switch
MODEL: 7-32V Switch
Parameters
- Input voltage: DC/AC 7V~32V
- Max. Current: 2200W/10A/Gang
- Wi-Fi Standard: Wi-Fi 2.4ghz b/g/n
- Working temperature: -20°C~70°C
- Material: ABS
- Size: 116*38*25mm
Checklist before using the device
- Your smart phone or tablet has connected to a 2.4g WiFi with internet.
- You have the correct WiFi PWD.
- Your smart phone or tablet must have access to APP store, Google play.
- Your router is MAC-open.
Working principle:
The connected appliances work/stop through live wire power on/off.
Device Components:
- Input
- Switch/pairing button
- RF pairing button
- Manual switch
- Network indicator (Red light)
- Power indicator (Blue light)
- NC, COM, NO terminals
Wiring Diagram:
[Diagram showing WiFi switch connected to router and cloud, with input power and output to appliances]
Self-locking and ON/OFF operating principle:
The connected appliances work/stop through live wire power on/off.
Self-locking wiring example:
[Diagram showing AC 90V-250V/10A input and DC 0-30V/10A output for self-locking mode]
Momentary wiring example:
[Diagram showing AC 90V-250V/10A input and DC 0-30V/10A output for momentary mode]
User Guide
- Start with "EWelink" APP.
- Register an EWelink account. If you have EWelink account, just login.
- Power up the device.
- Input your WiFi password.
- Name your device.
- When the network indicator is on, the device is online.
- Click the on/off buttons on the APP can control device. Manual control switch also can be displayed real-time on the APP.
Add device flow to mobile APP
- After installation, power the device and long press pairing button (anyone) for 5 seconds until Network indicator blinks quickly (blinking twice and on).
- Tap '+' on EWelink app.
- Select Quick Pairing.
- *Special cases: You can try compatibility Model (AP)*
APP Function
- For single/repeat timers.
- For fast single timer.
- Countdown timers.
- Rename/OTA/Share/Logs/Inching Settings/Delete device
- Home, Group Control & Share
[Diagram showing various timer and control options within the EWelink app]
Remote control matches the code
Matching:
- Hold RF pairing button for 3 seconds you want to match, until blue light is on.
- Then long press remote control button you want to match.
- Loosen the remote control buttons, matching success.
Clear code:
- Long press the RF pairing button for 15 seconds, loosen the RF pairing button until the RF pairing indicator is off.
*Note: The matching/clear code method is only available with RF function switch/module reference.
TROUBLESHOOTING
Enter the homepage of App, click the icon in the lower right corner of the interface to enter.
Guide: "Message" > hits "Guide".
Support: "Profile" > hits "Ewelink support".
[Screenshot of EWelink app interface showing navigation to Guide and Support sections]
How Devices Go Online:
How a WiFi device access to the eWeLink server?
[Diagram illustrating the connection flow of a WiFi device to the eWeLink server]
Pairing failed? Read this before you try again.
Which modes should you choose? What does each of them do?
[Diagram explaining different operating modes and their functions]
If none of the above is resolved, please open it with another phone. Personal hotspot, try to readd.
