WiFi Smart Switch

Before Using the Device

Please check the following before using the device:

• Your phone has been connected to a 2.4GHz WiFi.
• Your phone system version needs to be Android 5.0/iOS 10.0 or higher.
• Your phone must be able to access the APP store and download the eWeLink APP.
• If your router has set Mac address filtering, please enter the router settings to turn it off.

The device connects to the internet via your WiFi router and a server, allowing control through the eWeLink APP on your Android or iOS device.

Compatible Appliances

The switch can be connected to electric lights, sockets, fans, motors, refrigerators, washing machines, water heaters, and other electrical appliances.

Wiring

Connect the device using AC 85-265V power supply. Ensure correct wiring for Live (L) and Neutral (N) terminals.

Important Note: This switch requires a zero live wire power supply. Live installation is strictly prohibited. The switching principle relies on controlling the fire wire in the circuit. The device requires a zero live wire power supply to function correctly. The switch must be powered up by N (Neutral) and L (Live) wires.

The device features terminals labeled 'L' and 'N' for AC 85-265V input, and output terminals for connecting 'Electrical Appliances'. The device itself is labeled with Chinese characters: "智投北控制器" (Zhi Tou Bei Controller), "AC 85-265V", "零线" (Neutral wire), "火线" (Live wire), "智能总闸控制器" (Smart Main Gate Controller), "C002651", "番號:140" (Serial Number: 140), "CEROWS FC", and "智能服务生活" (Smart Service Life).

Add Device to eWeLink APP

Step 1: Download eWeLink

Download the eWeLink APP from your device's app store.

Step 2: Connect to WiFi and Bluetooth

Connect your phone to a 2.4GHz WiFi network and ensure Bluetooth is turned on.

Step 3: Enter Pairing Mode

Long press the pairing button for more than 5 seconds until the blue LED indicator blinks twice quickly and then stays on steadily to enter pairing mode.

Step 4: Scan and Add Device in APP

Open the eWeLink APP, tap the [Add] icon, select "Bluetooth Pairing", and click "Next". The app will automatically scan for the device.

The app offers various pairing methods: "Quick Pairing" (for eWeLink supported devices), "Scan QR code" (for devices with QR codes), "Sound Pairing" (for devices with sound pairing capabilities), and "Bluetooth Pairing".

Connecting the Device

After the device is discovered, select it from the list. Confirm that the relevant WiFi information is correct, click "Save", and wait for the device to connect.

The app displays a connection progress indicator, showing stages such as 'Connecting device', 'Retrieving device info', 'Registering device', and 'Sending network info'.

*The name of the scanned device may change; please refer to the actual situation.*

*WiFi information shown in the manual is for display purposes only and does not have any practical effect. Please refer to your actual WiFi network.*

For optimal connection, keep the device and your smartphone as close to the WiFi router as possible.

Frequently Asked Questions (FAQ)

Q: After the device is successfully added, why does the App display that it's offline and can't be controlled?

A: After the device is added, it requires 1-2 minutes to connect to the network. If it remains offline, check the Wi-Fi indicator status:

• Blue indicator LED blinks quickly once per second: Device is not connected to your Wi-Fi. This could be due to an incorrect Wi-Fi password, the device being too far from the router, weak signal, or environmental interference. Try moving the device closer to the router. If the issue persists, power cycle the device and re-add it.
• Blue indicator LED blinks quickly twice per second: The device is connected to Wi-Fi but not to the internet. Ensure your Wi-Fi connection is stable and normal. Frequent double blinks indicate an unstable network, not a product malfunction. If the network is normal, power off and restart the device.

Troubleshooting Wi-Fi Connection:

• The device cannot recognize 5G Wi-Fi; please select a 2.4G Wi-Fi network to re-add it.
• Ensure that Mac address filtering is not enabled in your router settings.
• If the above steps do not resolve the issue, try using another phone to open a personal hotspot and attempt to re-add the device.

Factory Reset

To perform a factory reset, press and hold the pairing button for 5 seconds until the LED indicator blinks twice. The device will then successfully reset and enter Bluetooth pairing mode.

Note: When changing to a new network, you need to restore the factory settings and then reconnect to the new network.

Works with AI Platforms

eWeLink has integrated with mainstream AI platforms. For quick compatibility checks, manufacturers may print the "Works with AI" eWeLink logo on the packaging.

Compatible platforms include:

• Works with Google Assistant
• Works with Alexa
• Works with IFTTT
• Works with Yandex Alice

Smart products supporting the eWeLink APP require certification for each AI platform before using their respective logos. Please refer to product certification details.