Vimar By-Me Plus Smart Automation Devices

Product Descriptions

• 32031.G: XT device for home automation with 2 buttons, configurable as a single rocker switch. Features LED status indication and dark localization with brightness adjustment. Includes a central label for symbol personalization. Black finish, 1 front module.
• 32033.G: XT device for home automation with 2 buttons, customizable with labels. Configurable as a single rocker switch with proximity function. Features labels with status indication and dark localization with brightness adjustment. Includes a central label for symbol personalization. Black finish, 1 front module.
• 32034.G: XT device for home automation with 4 customizable buttons. Features proximity function, labels with status indication, and dark localization with brightness adjustment. Black finish, 1 front module.

Features

• Power supply: via electrified XT support art. 32602.x, 32603.x, 32604.x, 32613.x or 32614.x and corresponding junction art. 32001.
• Max current draw from BUS: 32031.x: 7.5 mA; 32033.x, 32034.x: 12.5 mA.
• Red LED and Configuration/Reset button.
• Operating temperature: -5 °C to +45 °C (indoor use).
• Space requirement: 1 front module (30.5 mm).
• Standby brightness levels selectable via parameters.
• Rear connection to electrified XT support 32602.x, 32603.x, or 32604.x.
• Protection rating: IP20.
• Function blocks (buttons and rockers) can only belong to one group.

Configuration with the View Pro App

For detailed information, please refer to the instructions available for download on the website www.vimar.com.

Installation Instructions

• Installation must be performed by qualified personnel in accordance with the electrical material installation regulations in the country of use.
• The device must be installed on the following electrified XT supports:
  • 2 modules art. 32602.x (for 2-module box)
  • 3 modules art. 32603.x and 32613.x (for rectangular 3-module box)
  • 4 modules art. 32604.x and 32614.x (for rectangular 4-module box)
• For optimal operation, only one proximity sensor (proximity function) per light point should be active, with others deactivated.
• Avoid installing two or more switches with active proximity sensors facing each other if the distance is less than 4 meters.
• Avoid installing a button with an active proximity sensor in front of a device with an IR receiver to prevent interference.
• When removing or inserting buttons, or when snapping buttons into place, be careful not to dirty or scratch the proximity sensor lens.

Device Installation and Removal Diagrams

Visual guides are provided for the following procedures:

• Removing the Button: Insert a screwdriver at the indicated points.
• Attaching the Device: Align and press the device onto the support.
• Removing the Device: Detach the device from the support.

Norm Conformity

• NS Directive.
• EMC Directive.
• RoHS Directive.
• Standards: IEC 60669-2-1, EN 50491-2, EN IEC 63044, EN IEC 63000.
• REACH Regulation (EC) No. 1907/2006 - Art.33. The product may contain traces of lead.
• WEEE Directive on Waste Electrical and Electronic Equipment - User Information: The crossed-out dustbin symbol indicates separate collection at the end of the product's life. Users must return the device to designated municipal collection points or to retailers when purchasing a new equivalent device. Devices smaller than 25 cm can be returned to electronics retailers with a sales area of at least 400 m² free of charge without the obligation to purchase a new device. Proper separate collection contributes to environmental protection and resource recycling.

Compliance and Manufacturer Information

• CE Marking
• VIMAR
• Viale Vicenza 14
• 36063 Marostica VI - Italy
• www.vimar.com
• Document Reference: 32031-33-34 02 2507