Vimar By-Me Plus Smart Automation Devices
Models: 32031.G, 32033.G, 32034.G
Product Descriptions
32031.G: XT command device for By-me home automation with 2 push-buttons, also configurable with 1 rocker button, LED with status function and visibility in the dark with intensity regulation, central label for symbol customization, black - 1 front module.
32033.G: XT command device for By-me home automation with 2 customizable push-buttons with labels, also configurable with 1 rocker button, Proximity function, labels with status function and visibility in the dark with intensity regulation, central label for symbol customization, black - 1 front module.
32034.G: XT command device for By-me home automation with 4 customizable push-buttons with labels, Proximity function, labels with status function and visibility in the dark with intensity regulation, black - 1 front module.
Features
- Power Supply: Supplied by electrified XT support art. 32602.x, 32603.x, 32604.x, 32613.x or 32614.x and corresponding node art. 32001.
- Max BUS Absorption: 32031.x: 7.5 mA; 32033.x, 32034.x: 12.5 mA.
- LED and Configuration/Reset Button: Red LED and configuration/reset button.
- Operating Temperature: -5 °C to +45 °C (internal use).
- Module Occupancy: Occupies 1 front module of 30.5 mm.
- Stand-by Luminosity: Stand-by luminosity levels selectable via corresponding parameters.
- Connection: Rear connection to electrified support 32602.x, 32603.x or 32604.x.
- Protection Rating: IP20.
- Functionality: Push-button and rocker blocks have an equivalent group depth of 1 (meaning they can only belong to one group).
Functional Configuration Table:
| Feature | Art. 32031.G | Art. 32033.G | Art. 32034.G |
|---|---|---|---|
| 2 backlit push-buttons, also configurable as 1 rocker | ✓ | ✓ | |
| Central backlit label | ✓ | ✓ | |
| Top and bottom white LED for status indication | ✓ | ✓ | |
| Top and bottom label for status indication | ✓ | ||
| 4 backlit push-buttons | ✓ | ||
| 4 labels for status indication | ✓ | ||
| Proximity function | ✓ | ✓ | ✓ |
Configuration with the View Pro Application
For detailed information, consult the manuals available for download on the www.vimar.com website.
Installation Norms
- Installation must be carried out by qualified personnel in compliance with current regulations governing the installation of electrical materials in the country where the products are installed.
- The device must be mounted on electrified XT supports:
- 2 modules art. 32602.x (for 2-module boxes)
- 3 modules art. 32603.x and 32613.x (for rectangular 3-module boxes)
- 4 modules art. 32604.x and 32614.x (for rectangular 4-module boxes)
- To optimize operation, it is advisable to activate only one proximity sensor (proximity function) per light point, deactivating the others.
- Avoid mounting two or more controls with an activated proximity sensor facing each other at a distance of less than 4 meters. [Diagram showing two devices facing each other with a 'less than 4m' indicator].
- Avoid mounting a button with an activated proximity sensor in front of a device with an infrared receiver to prevent possible interference.
- When removing the button, inserting labels, and attaching the button, take care not to soil or scratch the proximity sensor lens.
Conformity to Standards
Low Voltage Directive. Electromagnetic Compatibility Directive. Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Standards IEC 60669-2-1, EN 50491-2, EN IEC 63044 and EN IEC 63000. REACH Regulation (EU) no. 1907/2006 - art. 33. The product may contain traces of lead.
WEEE - User Information: The crossed-out wheeled bin symbol on the equipment or its packaging indicates that at the end of its life, the product must not be disposed of with other waste. At the end of its life, the user must deliver the equipment to a collection center for electro-technical and electronic waste. Used equipment can also be returned free of charge to the retailer when purchasing a new equivalent product. Retailers of electronic equipment with a sales area of at least 400 m² must accept the free return of used electronic products smaller than 25 cm without the obligation to purchase. Selective collection of this waste facilitates the recycling of the appliance and its components, allows for environmentally compatible treatment and disposal, and prevents potential harm to nature and human health.
Diagrams and Visuals
Front and Rear View
32031.G: [Diagram showing front and rear view with labels A: Red LED, B: Proximity sensor, C: Configuration/reset button, D: White LED and button, E: Button and label]
32033.G: [Diagram showing front and rear view with labels A: Red LED, B: Proximity sensor, C: Configuration/reset button, D: White LED and button, E: Button and label]
32034.G: [Diagram showing front and rear view with labels A: Red LED, B: Proximity sensor, C: Configuration/reset button, D: White LED and button, E: Button and label]
Label Introduction
32031.G-32033.G: [Diagram showing label insertion process for 32031.G/32033.G with reference to 32090.PG]
32034.G: [Diagram showing label insertion process for 32034.G with reference to 32090.PG]
Key Attachment
32031.G-32033.G: [Diagram showing steps for attaching the key/button for 32031.G/32033.G]
32034.G: [Diagram showing steps for attaching the key/button for 32034.G]
Key Detachment
32031.G-32033.G: [Diagram showing steps for detaching the key/button for 32031.G/32033.G, indicating screwdriver insertion points]
32034.G: [Diagram showing steps for detaching the key/button for 32034.G, indicating screwdriver insertion points]
Device Attachment
[Diagram showing the steps for attaching the device to the mounting base]
Device Detachment
[Diagram showing the steps for detaching the device from the mounting base]
