Vimar By-Me Plus Smart Automation Devices
Models: 32031.G, 32033.G, 32034.G
Product Descriptions
32031.G: XT control device for By-me home automation with 2 push buttons. Configurable as a single-pole switch, features an LED with status and night-light function, central label for symbol customization. Black, 1 frontal module.
32033.G: XT control device for By-me home automation with 2 customizable push buttons with labels. Configurable as a single-pole switch, proximity sensor function, labels with status and night-light function, central label for symbol customization. Black, 1 frontal module.
32034.G: XT control device for By-me home automation with 4 customizable push buttons with labels, proximity sensor function, labels with status and night-light function. Black, 1 frontal module.
Characteristics
- Power Supply: Via electrified XT base art. 32602.x, 32603.x, 32604.x, 32613.x or 32614.x and corresponding node art. 32001.
- Maximum BUS Absorption:
- 32031.x: 7.5 mA
- 32033.x, 32034.x: 12.5 mA
- Red LED and configuration/reset push button.
- Operating Temperature: -5 °C to +45 °C (indoor use).
- Occupies 1 frontal module (30.5 mm).
- Standby brightness levels selectable via corresponding settings.
- Connection at the rear of the electrified base 32602.x, 32603.x, or 32604.x.
- Protection Rating: IP20.
- Push button and single-pole switch functional blocks can be associated with a single group (group depth 1).
| Feature | Art. 32031.G | Art. 32033.G | Art. 32034.G |
|---|---|---|---|
| 2 configurable backlit buttons, also as single-pole switch | ✓ | ✓ | |
| Backlit central label | ✓ | ✓ | |
| White LED, upper and lower, for status indication | ✓ | ✓ | |
| Upper and lower label for status indication | ✓ | ✓ | |
| 4 backlit keys | ✓ | ||
| 4 labels for status indication | ✓ | ||
| Proximity sensor function | ✓ | ✓ | ✓ |
Configuration with the View Pro App
For complete information, consult the manuals available for download on the vimar.com website.
Installation Instructions
The circuit must be installed by qualified technicians in accordance with current national regulations for electrical installations.
Install the device on electrified XT bases:
- 2-module art. 32602.x (for 2-module boxes)
- 3-module art. 32603.x and 32613.x (for rectangular 3-module boxes)
- 4-module art. 32604.x and 32614.x (for rectangular 4-module boxes)
Recommendations for optimal operation:
- It is advisable to have only one proximity sensor (proximity sensor function) active per lighting point, deactivating the others.
- Avoid installing two or more controls with active proximity sensors facing each other if the distance is less than 4 meters. [Distance Symbol] < 4 m
- Avoid installing a button with an active proximity sensor in front of a device equipped with an infrared receiver to prevent interference.
- When removing the button, inserting labels, and fixing the button, be careful not to dirty or scratch the proximity sensor lens.
Diagrams:
Front and Rear View:
- 32031.G: A: Red LED, B: Proximity sensor, C: Configuration/reset push button, D: White LED and push button, E: Push button and label.
- 32033.G: D: White LED and push button, E: Push button and label.
- 32034.G: E: Push button and label.
Label Installation:
Shows installation of labels (art. 32090.PG) for 32031.G-32033.G and 32034.G models.
Button Fixing:
Illustrates the steps for fixing the button for 32031.G-32033.G and 32034.G models.
Button Removal:
Illustrates the steps for removing the button by inserting a screwdriver into indicated points for 32031.G-32033.G and 32034.G models.
Device Fixing:
Illustrates the steps for fixing the device.
Device Removal:
Illustrates the steps for removing the device.
Compliance with Standards
Low Voltage Directive (BT), EMC Directive, RoHS Directive.
Standards: IEC 60669-2-1, EN 50491-2, EN IEC 63044, EN IEC 63000.
REACH Regulation (EU) No 1907/2006 - art.33. The product may contain traces of lead.
WEEE - Information for Users:
The crossed-out wheeled bin symbol on the device or packaging indicates that the product must be separated from other waste at the end of its life cycle. Users must deliver the device to a municipal selective collection center for electronic and electrotechnical waste. In addition to independent disposal, users can also return the device to a retailer free of charge when purchasing an equivalent new product. Retailers of electronic equipment with a sales area larger than 400 m² will collect end-of-life electronic products free of charge, without purchase obligation, provided that the device dimensions do not exceed 25 cm. Selective collection aimed at recycling, reprocessing, and environmentally sound disposal helps prevent environmental pollution and its effects on health, and promotes the reuse of its components.
