GURSKEN
Safety Warnings
⚠️ WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Parts and Tools
The following parts and tools are required for assembly:
Tools Required:
- [Screwdriver]
- [Hammer]
- [Drill] with Ø 8 mm (5/16") and Ø 3 mm (1/8") drill bits
- [Allen key]
Hardware Included:
- 8x Screw (101221)
- 12x Dowel (100006)
- 12x Cam lock (102323)
- 14x Screw (101345)
- 3x Screw (108443)
- 12x Screw (109041)
- 12x Screw (105811)
- 6x Screw (105493)
- 4x Knob (107849)
- 12x Drawer runner component (103114)
- 1x Plastic bracket (123492)
- 1x Allen key (110519)
- 1x Bag of screws (105779)
- 3x Knob (1058243)
- 2x Bracket (109049)
- 2x Bracket (10078275)
- 1x Bracket (10076617)
- 6x Bracket (149842)
- 3x Bracket (155370)
- 2x Screw (109048)
- 4x Screw (100823)
- 2x Screw (121714)
- 2x Wall plug (326949)
- 2x Bracket (106989)
Assembly Steps
Step 1: Identify and count all included hardware and components. This includes various types of screws (e.g., 101221, 101345, 109041), dowels (100006), cam locks (102323), drawer runners (103114), knobs (107849), brackets, and an Allen key (110519).
Step 2: Insert dowels (100006) into the pre-drilled holes of the base panel. Attach the side panels to the base panel, aligning the holes, and secure them using cam locks (102323).
Step 3: Attach the back panels to the assembled sides and base using screws (e.g., 109041).
Step 4: Mount the drawer runners (e.g., 103114) to the inside of the side panels using screws (e.g., 105811).
Step 5: Assemble the drawer boxes by joining the drawer sides, back, and base panels. Use dowels (100006) and screws (e.g., 109041) to secure the drawer box structure.
Step 6: Attach the drawer fronts to the assembled drawer boxes. Align the front panel and secure it from the inside using screws (e.g., 105493).
Step 7: Insert the assembled drawers into the main unit, sliding them onto the runners.
Step 8: Attach the anti-tip safety device. Secure one part to the top rear of the unit using screws (e.g., 100232) and the other part to the wall using appropriate wall fixings (see wall mounting section).
Step 9: Continue assembling the main frame. Attach the next set of side panels to the base and back panels using dowels and screws.
Step 10: Secure the structure with screws (e.g., 101345), ensuring all connections are tight.
Step 11: Attach the top panel to the main frame using screws (e.g., 109041).
Step 12: Slide the back panel into the grooves and secure it with screws or nails if provided.
Step 13: Attach drawer runners (e.g., 103114) to the sides of the drawer boxes using screws (e.g., 105811).
Step 14: Attach the drawer front to the drawer box using screws (e.g., 105493).
Step 15: Place the top surface of the unit onto the assembled frame.
Step 16: Secure the top surface using brackets (e.g., 149842) and screws (e.g., 100823).
Step 17: Attach drawer runners (e.g., 103114) to the drawer sides using screws (e.g., 105493).
Step 18: Attach the drawer front to the drawer box using screws (e.g., 101221).
Step 19: Assemble the drawer box by joining the sides, back, and base panels using screws (e.g., 107849).
Step 20: Attach drawer runners (e.g., 103114) to the drawer sides using screws (e.g., 105811).
Step 21: Attach drawer runners (e.g., 103114) to the drawer sides using screws (e.g., 105493).
Step 22: Slide the back panel into place.
Step 23: Attach drawer runners (e.g., 103114) to the drawer sides using screws (e.g., 100823).
Step 24: Assemble the drawer box by joining the sides, back, and base using screws (e.g., 123492).
Step 25: Attach drawer runners (e.g., 103114) to the drawer sides using screws (e.g., 101345).
Step 26: Attach side panels to the base using dowels (100006) and screws (e.g., 101345).
Step 27: Secure the structure with screws (e.g., 103114).
Step 28: Attach the back panel using screws (e.g., 105811).
Step 29: Slide the back panel into place.
Step 30: Attach the top panel to the main frame.
Step 31: Secure the top panel with screws (e.g., 110519).
Step 32: Attach drawer runners to the drawer sides using screws.
Step 33: Attach the drawer front to the drawer box using screws (e.g., 10058243, 108443).
Step 34: Attach drawer runners to the drawer sides using screws (e.g., 102323).
Step 35: Insert the assembled drawers into the main unit. Ensure the anti-tip device is correctly installed.
Wall Mounting Instructions
The supplied screws and plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If uncertain, seek professional advice.
Wall Type A (Solid Walls):
- Drill a hole with Ø 8 mm (5/16") bit.
- Insert the wall plug (326949).
- Secure the bracket with a screw (e.g., 109049).
Wall Type B (Hollow Walls):
- Drill a hole with Ø 8 mm (5/16") bit.
- Insert the wall plug (326949).
- Secure the bracket with a screw (e.g., 109049).
Wall Type C (Solid Wood):
- Drill a hole with Ø 3 mm (1/8") bit.
- Secure the bracket directly with a screw (no plug needed).
Note: For wall mounting, ensure the depth of the hole is approximately 70 mm (2 3/4") for Type A and B, and approximately 30 mm (1 1/4") for Type C.
