MALM Chest of 3 Drawers
Product Overview
This document provides assembly instructions for the MALM chest of 3 drawers. The MALM series is known for its clean design and functionality, offering practical storage solutions for the home.
Brand: IKEA
Design and Quality: IKEA of Sweden
Tools and Safety Precautions
Required Tools
The following tools are typically required for assembly:
- Phillips head screwdriver ?
- Flathead screwdriver ?
- Hammer ?
Assembly Guidance
Follow these guidelines for safe and effective assembly:
- Ensure assembly is performed by at least two people.
- Assemble on a clean, flat, and hard surface to avoid damaging components or the floor. ❌ Do not assemble on soft surfaces like carpets.
- Handle components with care to prevent damage. ❌ Avoid forcing parts together.
- If you encounter difficulties or have questions during assembly, consult the instructions or contact IKEA customer support. ℹ️
Parts and Hardware
Before starting, verify that all parts and hardware are present. Refer to the diagrams for identification.
Hardware
| Part Number | Quantity | Description |
|---|---|---|
| 118331 | 12x | Screw |
| 110519 | 12x | Screw |
| 101345 | 12x | Dowel |
| 105344 | 6x | Cam Lock Screw |
| 100365 | 18x | Screw |
| 117434 | 12x | Cam Lock Nut |
| 119030 | 6x | Cam Lock Screw |
| 120076 | 6x | Cam Lock Screw |
| 115339 | 6x | Screw |
Drawer Slides
| Part Numbers | Quantity | Description |
|---|---|---|
| 118790, 148601 | 3x | Drawer Slide (Cabinet Member) |
| 123833, 105344 | 3x | Drawer Slide (Drawer Member) |
Assembly Steps
Step 1
Attach one side panel (part 2) to the base panel (part 1) using 4x screws (118331).
Step 2
Attach the second side panel (part 2) to the base panel (part 1) using 4x dowels (101345).
Step 3
Attach the back panel (part 3) to the assembled base and side panels. A warning pictogram indicates to handle parts carefully to avoid damage. ⚠️
Step 4
Attach the top panel (part 4) to the side panels. Use 4x cam lock screws (117434) and 4x cam lock nuts (119030, 120076).
Step 5
Slide the back panel into the grooves of the side and base panels. ➡️
Step 6
Secure the back panel by inserting screws (110519) into pre-drilled holes.
Step 7
Attach the cabinet member of the drawer slides (118790, 148601) to the inside of the chest frame using screws (115339).
Step 8
Assemble the drawer boxes. Attach the drawer sides to the drawer front and back panels using screws (118790, 148601).
Step 9
Slide the drawer bottom panel into the grooves of the assembled drawer box.
Step 10
Attach the drawer front panel to the drawer box using screws (100365).
Step 11
Attach the drawer member of the drawer slides (123833, 105344) to the assembled drawer boxes using screws (105344).
Step 12
Insert the assembled drawers into the chest. ➡️
Important Safety Note: To prevent serious or fatal crushing injuries from furniture tip-over, furniture must be permanently secured to the wall with tip-over restraints. ⚠️ Secure the furniture to the wall using appropriate hardware (not detailed in this specific diagram, but typically included or recommended). ➡️
