Parts and Tools List

The following parts are included with your Sheila Hydraulic Bed:

• Armrest (Quantity: 2)
• Hydraulic Bed Unit (Quantity: 1)

Assembly Instructions

Step 1: Prepare the Bed Frame

Follow these steps to prepare the main bed frame for assembly:

1. Carefully remove the bed frame from its packaging and place it on a flat, stable surface.
2. Locate the adjusting rods for the backrest cushion. These are attached to the underside of the backrest. Remove the screws found at the end of each rod.
3. Insert each adjusting rod into the corresponding guiding mechanism attached to the bed frame. Important: Ensure the guiding mechanism is oriented upwards to guarantee correct installation and functionality.
4. Once the adjusting rod is correctly inserted, reattach the screws into the adjusting rods and tighten them securely.

Step 2: Install the Leg Support Rod

This step involves attaching the leg support mechanism:

1. Locate and remove the two screws from the guiding mechanism situated beneath the leg cushion.
2. Insert the leg support rod into this guiding mechanism.
3. Reinstall the screws and tighten them securely to complete this step.

Step 3: Attach the Armrests

Final assembly of the armrests:

1. Align each armrest with the designated holes on the sides of the bed frame.
2. Slide the armrests evenly into the holes. Confirm they are fully secure and level before proceeding to use the bed.

Product Care Guidelines

• Regularly brush away excess hair from the upholstery. ?
• Clean surfaces using a damp cloth or a mild soap and water solution. ?
• Avoid using harsh cleaning agents, such as bleaches, as they can damage the material. ⚠️
• Do not attempt to remove the upholstery for cleaning purposes. ❌

Product Information and Usage Tips

1. Enjoy your new hydraulic bed!
2. Before initial use, it is recommended to cycle the hydraulic system. Pump the bed to its full height and then lower it completely several times. This process primes the hydraulic fluid, ensuring smooth and responsive operation.
3. For height adjustments, short, quick pumps of the lever are more effective than prolonged, full-stroke presses.
4. Should you have any questions or require assistance, please contact the Buy-Rite customer experience team at 912-335-4445.